How to vertically steam tulle with an iron

How to iron a tulle with an iron or smooth it without an iron

Beautiful curtains from tulle fabric make the room cozy and perform their functions for a long time, but they often have to be washed to remove dust from the fabric and bring them to the original form. After washing, the problem is relevant how to stroke tulle. Delicate, thin fabric under the influence of high temperatures can easily deteriorate. A significant width and length of the curtain also causes difficulties.

Is it possible to iron the curtains with an iron

Most of the materials from which the curtains are sewn are not afraid of an iron. So that the process of smoothing does not become torment, it is necessary to equip the working area by applying one trick:

  • Install an ironing board near the window.
  • Iron the upper part.
  • Hook her by the cornice.
  • Continue the deposit of the lower part.

The method accelerates ironing and applies to different curtains, but most of all approaches easily. The first. The fabric on the ironing board does not need to be constantly maintained, the second. This is how you can prevent the occurrence of unwanted folds.

How to stroke tulle: useful tips

To avoid damage to a delicate product, they use gauze or special lining.

It will not work to carry out ironing quickly, since delicate fabrics require a reverent relationship. In order not to spoil the tulle, experienced housewives recommend using gauze. She gets better on the fabric and does not allow her to damage the iron. The quality of the ironing largely depends on the iron, if there are black high spots on its surface, they can leave traces of tulle. Therefore, before the procedure, the device is better to clean. It is very good to use a special nozzle, they are included with modern iron models.

General recommendations

Tulle and curtains after washing always have dents, so it is necessary to carry out a number of procedures to equalize them. Most fabrics provide for ironing. The temperature depends on the material, but it should not drop below 80 and rise above 150 degrees. Synthetic fabrics require the most delicate regime and necessarily the use of the protective layer. There will be enough ordinary paper or cotton fabric.

How to stroke the organza?

The material is not recommended to dry with the help of a washing machine.

Very capricious, but beautiful material that looks flawless on the window. This is a very elastic tissue, so you can wash the organza in a typewriter using a delicate mode. Dry in automatic mode is not worth. After washing, the curtain should dry, but not bring the material to drying out. It is better that it hesitates in the wind, but without exposure to straight rays of the sun. It is difficult to iron tulle from an organza so as not to spoil the tissue, it is worth following the following rules:

  • Use the “nylon” mode or a minimum temperature of 80 degrees.
  • Iron only inside out, carefully placing on the ironing board.
  • As a protective layer, use gauze or paper. Without protection of high probability of handling.
  • Lap.

It is forbidden to use the pair mode for organza, this will lead to a loss of shine.


The use of hot steam is not desirable for synthetic fabrics.

Washing and ironing of synthetic materials and organza are very similar, these two types require a delicate handling and can easily deteriorate. You should also not use pairs, you should choose a minimum temperature regime. Drying tulle after washing is not recommended, it is better to iron immediately. Dry fabric is very difficult to align, the folds remain until the next wash. Moisturizing with artificial method using a spray gun is not recommended, water can leave traces.

See also  How can you smooth a T -shirt without an iron

For synthetics, the maximum temperature is 100-110 degrees. Mandatory use of a protective layer in the form of a cotton blade or paper towel. Otherwise, the tulle may burn out and holes will remain. In addition, synthetic fabric can leave traces on the surface of the iron, thus ruin the device. After ironing the curtain, you should immediately hang. If there is a special iron that allows you to stroke the curtains without removing, it will be convenient after washing synthetic fabric.

Cotton tulle

Natural materials are easier to wash and iron. High temperature regimes are suitable for them as a result of which after washing things are more smooth and beautiful. So that the cotton curtains look beautiful, they need to be stroked with wet. If it is not possible to start the procedure immediately after washing, you can moisturize with a wet canvas or spray gun. Stroke such tulles at a temperature of 150 degrees.

vertically, steam, tulle, iron

Using Steam Iron for clothes

Products from natural materials are allowed not to be given thermal effects.

Natural cotton fabrics can not be ironed at all. Many housewives immediately after washing prefer to hang them on the cornice. After 2-3 hours, they dry on their own and become even. To do without ironing, it is very important immediately after the drum to level the curtains. Otherwise, after 10 minutes, folds are formed that require heat treatment.

Kapron tulle

Curtains from such fabric are rarely used, they look beautiful, but require trepidable care. For ironing, the mode is up to 110 degrees. Be sure to use a cotton protective layer, the procedure is carried out only on wet curtains. To align all the folds, you need to make efforts, each place should go through an iron 3-4 times. It is not recommended to use steam. It is still warm to hang such tulles on the cornices so as not to rush again.

Kapron curtains can level themselves if they are wetted in the fresh air and wait until it dries completely.

The steamer as an alternative

How to stroke the curtains without removing them? The steamer will come to your aid. Many have long acquired this wonderful thing and forgot about what it feels like to use the iron. In the modern market of goods, steamers are produced of different capacities and temperature. Interesting in this case will be manual or vertical devices.

How to stroke the curtains without removing

In this regard, the answer is unambiguous and categorical. In no way! Since before stroking the product. It must be washed, cleaned of dirt and dust, web. Even the most scrupulous housewife from the dust can not get away from the dust, and on the curtain, she likes how she loves. So you still have to shoot your beloved curtain-but iron it on the cornice itself by steaming or exploring, as described above.

If there is no steamer at home. You can rent, for example, for a while from friends, take it in special cleaning companies for rent and start cleaning. If it was not possible to steam the fabric at a time, you can repeat the procedure 1-2 times. But regardless of whether you iron the tulle with an iron or a steam generator. The main thing is not to rush, start with small areas and not make sudden movements.

Glass secrets of different fabrics

Tulle can be of different types and quality. Therefore, before the start of ironing, it is important to find out what specific material the tulle is made of. Because for different fabrics there are small nuances.

  • Clean fabric before ironing slightly moisturize. The temperature of the sole of the iron should not be higher than 120 degrees. Such fabric will not straighten if you hang it vertically, so you can not do without exposure to high temperatures;
  • You need to iron only from the inside. Between the surface of the iron and the cloth, it is worth laying moistened with water and squeezed gauze;
  • Before stroking the entire fabric, you should test and choose a temperature on an inconspicuous area comfortable synthetics. So the risk of being left without curtains will be minimal.
See also  Close the boiler in the kitchen cabinet options

Organza is unpretentious in washing, but very difficult to smooth the material:

  • In order to avoid stretching the fabric and wavy creases, the function of steaming should beware;
  • Before you start ironing, you need to wait for its complete drying;
  • To prevent plowing after washing fabric, it is worth using cigarette paper.

Cotton or flax is afraid of spinning. After twisting, such a fabric is unlikely to be smoothed out. Adviсe:

  • Gently hang wet tissue on the cornice. The material will be smoothed out under its own weight;
  • In order to avoid damage to the tissue, a temperature of more than 100 degrees should beware. Ironing is recommended only from the wrong side.

How to stroke a large tulle

Large curtains deliver problems. One edge is smoothed, the other becomes crumpled.

  • One edge is placed on the board, the other gradually descends towards the floor. When the edge touches the floor, it is suspended on the curtain.
  • A wet curtain is hung on the cornice. Drying, it will deal with her own weight.

How to stroke tulle correctly

Today there are many types of textiles for windows, each of which reacts differently to water and iron. If you do not know what the material is made of, then you can easily ruin the beautiful product. This will not happen if you find out all the subtleties of ironing in advance.

Ironing black and white plaid shirts

Before ironing tulle, you need to clean the sole of the iron. Submalins and pollution must be removed so as not to spoil the delicate material. Before ironing, it is imperative to study the label in order to take into account the recommendations and properties of fabric.

In this example (polyester). Ironing is allowed at temperatures up to 100. 110 ° C


Since the material is weaves from very thin fibers, you need to handle it extremely carefully. There are several ways to carefully stroke tulle from organza:

  • Ferry processing. The easiest and fastest way is to use a steam generator or a steaming function on the iron. It is necessary to hang tulle on the cornice, and then walk around the cut 1-2 times.
  • Improte an iron. Heating mode is selected depending on the composition of the organza. Semi.Winding curtains are ironed from the wrong side through gauze.
  • Hanging to the cornice immediately after washing. If the fabric does not straighten, then the folds and creases must be moistened with water from the spray gun, straightened with your hands and leave to dry.

Advice! Organza made of natural silk should not be sprayed with water, since after drying on the canvas there are stains.


The fabric is made of polyamide fibers obtained from oil. It is not recommended to iron nylon tulle, since the material is easy to melt.

If the process is necessary, it is important to do it correctly:

  • Capron should be smoothed, barely touching, and better. Through a thin fabric.
  • Do not make smoothing movements so as not to stretch the fabric. The iron must be rearranged from place to place.
  • Kapron should not be moistened during ironing or treated with a steam generator, since the fabric will stretch and covered with waves.

Len and cotton

Natural fabrics are easily crushed, so during washing you need to take care so that the material does not deform. To do this, you need to use a delicate mode and turn off the squeeze. In extreme cases, use the smallest speeds.

See also  How to vacuum the bottom of the Bestway basin

It is best to hang the cotton tulle so that the glass is water, and then attach to the cornice and carefully straighten down. When the canvas dries (it takes about 1 day), it will look fresh.

If you can’t do without an iron, then you need to iron a cotton tulle at 90-120 ° C from the wrong side. With strong bruises. Stiffen through wet fabric.

Linen tulles are ironed at high temperatures, having previously undergrave or moisturize. As in the case of cotton materials, they can be hung wet for natural delay.


Delicate fabric resembling gauze can be made of silk, cotton and even wool. But today, curtains are more often used by synthetic material. It is recommended to iron it only after washing, since any, invisible to the human eye, a speck, will be strongly fixed under the iron.

In order to injure delicate fabric less, during washing cannot be twisted and squeezed out. As soon as the water is draining, the tulle must be hung on the cornice, carefully straightened and leave until drying out.

If you need to stroke, then this can be done with a steam generator or an iron heated to a temperature not exceeding 110 ° C. So that the fabric does not stretch, it must be stroked through a thin fabric, rearranging the electrical appliance from place to place and avoiding movements back and forth.


The fabric is extremely capricious in care, so even a delicate washing does not always save from bruises. In addition, synthetics does not have the ability to align independently, so hanging in wet form will not give anything. The curtains are recommended to be ironed underlying or moisturized from the inside.


Artificial material, raw materials for which is wood. It is better to steam viscose by hanging on the cornice. If vertical processing is impossible, then the tulle is ironed on the board, setting 120 ° C. You should not spray from the spray gun, since traces of water will appear on the canvas, and the material itself will become wavy.

The difference from the steam cleaner

The steamer and steam cleaner work on a similar principle and look approximately the same, what is their difference? And which device is better suited for curtains?

The steamers were released on the market as a technique for caring for textile products, the main functions of which: ironing, cleaning and disinfection. The steamers are positioned as devices to combat dirt and are intended more to work with hard surfaces (tables, floors, walls), although their use is permissible for things. For curtains. In extreme cases (it is possible, but inconvenient).

Floor steamer for curtains has a telescopic bar, facilitating the ironing of fabric by weight. The steam cleaner does not have such a nozzle. It can only be wielded in a horizontal plane. Due to the fact that the steam in it is supplied under high pressure (for the effective elimination of dirt), it is not able to perfectly smooth out textiles. Whereas the steamer allows you to adjust the degree of steam power, which gives a good smooth effect.

If you still impresses the steam cleaner more, buy a separate nozzle to it, designed specifically for ironing curtains. Ideally, it should have several holes (to reduce steam power), and not one. This will contribute to more careful tissue processing.

| Denial of responsibility | Contacts |RSS