How to remove the cover on a washing machine

Can the lid of the washing machine be removed?

The washing machines, as well as any kind of home appliances, need timely servicing, careful maintenance, are exposed to different damages, as a result of the user negligence (disregard of the manufacturer’s recommendations, usage without filters and voltage stabilizers, etc.). п.), and because of the natural wear and tear of parts and assemblies over time. To determine and fix some breakdowns (both serious and not so serious) sometimes it may be necessary to remove the top panel. For example, if the knob is broken or the lock is locked and you need to access the inside of the Cwm. That is why many home masters are interested in how to remove the top cover or disassemble other parts of the washing machine. Many users do not know what steps to take and resort to costly services of craftsmen. In fact, the removal procedure itself is not complicated, and in this material we will describe in detail what to do.

Panels that close access to the washing machine, held on screws, sometimes on hidden fasteners that move apart when sliding the lid to the side. As a rule, in all the units, both rear and front panels are removable, and in modern models of the automatic gas washer even the top ones.

Important! Exercise caution when loosening screws, parts. Put the removed fasteners in the pre-marked envelopes, so as not to mix up anything at the stage of assembly.

After that move the machine to the side. This is important, since in many models of washing machines bolts that hold the top part, are placed on the back side. If it is a built-in appliance, you will also need to remove it from the niche.

To unscrew the cover in a washing machine (no matter what model), you will need an ordinary Phillips screwdriver. Depending on the type (side or top loading), the procedure will be slightly different. Today we will talk about all cases, details and exceptions.

How to Remove the Top Cover of a Front-loading Washing Machine

First, prepare the machine for the procedure:

  • Disconnect from the power grid, utilities.
  • Pull it away from the wall, out of the closet, niche, from under the sink. you’ll need room to maneuver.
  • Look to see where the fastening screws are located. most often at the back, but they can be at the front, like on older Siemens models. Bosch.
  • Choose a suitable screwdriver or nozzle for your favorite screwdriver and unscrew the bolts.

How to remove the cover

  • Push it from the front of your body until the fasteners slide out of the slots.
  • When the surface moves forward, lift it up and gently remove it. This method is suitable for brands Indesit, Samsung. LG. You can find out how to open the top in 30 seconds by watching this


There are always original SM modifications, which do not have everything so easy. For example, in order not to damage the top “Ariston”, “Bosch”, “Siemens”, do not push it forward, lift it, pulling it toward you, at the right angle. You have to look for the position intuitively, until the fastening hooks come out of the holes.

remove, cover, washing, machine

Models with vertical loading

If the cover of the “vertical loader” is broken (for example, hinges, lock, powder collector), it too can be dismantled.

The second step is to dismantle the control panel:

By unscrewing the panel, you will gain access to the bolts that hold the moving part. Unscrew them. done!

How to disassemble the top of an upright CM, you can see here:

If you own a “vertical” Zanussi. You’ll have to tussle with the side panels to get to the fasteners. This video tutorial will help you:

As you can see, the process does not take much time, does not require expensive, rare equipment. A suitable screwdriver in skilful hands. and the thing is in the bag.

Removing the cover

Often the need for disassembly work occurs when there is a breakdown inside the enclosure. If you’re faced with a washing machine breakdown, you need to figure out the cause of the malfunction. that’s where you’ll need to disassemble. In many cases, it starts with removing the cover.

If you wonder which washing machines have removable top lid, then the first answer will be: the front-loading SM. In this article we will consider whether you can do it yourself.

With regard to brands and models, it happens that under the same brand there are different model series, in which the lid is removed in different ways, and maybe not removed at all.

If your machine is less than 10 years old, the top cover should always be removable.

See also  Designations of the icon on the washing machine eyelid

Removing the top cover of the washing machine will not require careful preparation, and from the tools you will need only a screwdriver. give preference to the cross type.

Important! The top panel is bolted to the back. Therefore, if your washing machine is installed against the wall, you need to pull out the machine.

Do not forget about safety: before you remove the cover, disconnect the power cord by pulling the plug out of the socket. Then proceed as follows:

Knowing how to open the top cover of your washing machine automatically gives you an idea of how to close it. To install the panel in place, you need to put the front part in the grooves and push it forward. at the very end, screw in the fasteners.

How to get to the drive mechanism?

If you use a belt-driven Electrolux washer, it is possible that sooner or later the belt will stretch or come off. If you find yourself in this situation, you will need to replace the damaged element in order to restore the machine to working order. Let’s look at how to do this with a minimum of time and effort, if the back panel simply does not detach from the case. Before you begin repair work, first disconnect the machine from the power source. Following this, the steps will be as follows:

remove, cover, washing, machine
  • Separate the upper part of the case by unscrewing a couple of fixing screws;
  • Tilt the machine forward slightly, but do not overdo it. Then, by slipping your hand over the top, remove the drive belt from the pulley, which is behind the rear panel;
  • Remove the removed belt from the machine;
  • taking the new belt in your hand, tilt the housing towards you and carefully run the belt in its place, first placing it on the motor shaft. This may require several attempts, so the best way is for an assistant to look under the bottom of the washing machine and control the movement of the tensioned rubber;
  • pull the drive belt over the pulley (metal wheel) of the drum. Start by stretching it on one edge of the wheel, then rotate the drum by sticking your hand through the washing machine hatch, and this will cause the belt to “sit” where it needs to go;
  • Check that the belt is correctly positioned on the end of the pulley without slipping to the side;
  • If the elastic band is displaced, it should be corrected by hand, checking the position of the driving mechanism element on the motor shaft.

Following this, it is necessary to check the performance of the Electrolux machine. Connect it to the mains and run it in spin mode for checking. Starting to rotate the drum means that you have replaced the belt properly. After that, return the upper housing panel back into place, fix it with screws. and the washing machine is fully ready to work.

Why do it?

We told you how to remove the cover from the LG washing machine, but what exactly is it for? What parts the beginner can get to if the upper part of the housing of the machine is dismantled?

First of all, you can get to the filling valve of the LG washing machine. If there are problems with water supply, underfilling or overfilling, the first thing to check is the water filling valve, which is located on top in the corner of the case near the back wall. A novice handyman can ring the coil of the fill valve, check the wiring, spigots and even the mechanism. It is also possible to completely replace the faulty part and all this can be done only by removing the cover, without further disassembly SM.

Powder doesn’t rinse out well? So it is necessary to check the water supply in the powder hopper washing machine LG, and for this again need to open the top cover. through the upper part of the housing you have full access to the necessary pipe, you can take it off and clean it and also replace it if necessary.

Immediately under the top cover of the machine you may find and pressostat. This element should be checked if the machine does not drain water in time, or refuses to drain it, giving an error OE. To change a defective water level sensor is very easy, if you get to it from above: unscrew the bracket, remove the power leads and there you have the broken pressostat in your hands.

Having removed the LG washing machine cover, you will also be able to reach the top counterweight. Of course, counterweights break very rarely, but sometimes it happens and again you can’t do without removing the top cover. Through the upper part of the housing, you can even remove the tank along with the drum. Telling the truth to perform such operation it is necessary to remove the panel, front wall and to unscrew the service hatch in the back part of the machine, but the process of disassembling undoubtedly begins with a cover.

See also  Where is the pump in the washing machine

Having removed the LG SM cover it is possible to reach even the mains filter in case of problems with power supply of the machine.

So, removing the cover from the LG washing machine is the first basis, without knowledge of which it is impossible to carry out an independent repair. Making this “first step”, you will subsequently learn everything else. It takes will!

How to Disassemble LG Washing Machine

There are situations that require an immediate response. What to do if the bearings in the washing machine are worn out? Or the motor is broken? It is impossible to operate the technique, and washing by hand is troublesome. That is why we will tell you how to disassemble the LG washing machine. These works under force to perform and you, if there is no desire to overpay for the services of a master.

How to disassemble the LG automatic machine: the preparatory stage

The manufacturers of LG washing machines have taken care not only of modern functionality, but also of the repairability of equipment. Indeed, the disassembly of the device is possible with a screwdriver and pliers. But if you want to get the job done faster, then prepare:

  • Pliers or round pliers.
  • Nut wrench.
  • Flat and Phillips screwdriver.
  • Hammer.
  • Screwdriver.
  • A wrench with socket heads.

The device of LG washing machine almost does not differ from other brands. Earlier models were available with a conventional motor located under the tank. Today you can find modern models with direct drive in stores. Inverter motor is attached directly to the tank without using a belt.

remove, cover, washing, machine

How to disassemble the LG washing machine (CMA): stages of work

Any work with machinery must be accompanied by safety rules. Unplug the machine. Close the water inlet valve. Prepare a container and disconnect the fill hose from the body of the washing machine, and the drain hose from the sewer or siphon.

Interesting! Want to make it easier to assemble the technique? Then record the disassembly process with a video or photo camera.

What scheme should be followed? First let’s remove the walls and covers, then work on the wiring and disconnect the main parts and assemblies.

We recommend! Drain the remaining water from the tank so that in the process of repair it does not get on the control board.

  • Open the small door underneath the boot hatch.
  • Place a container underneath.
  • Unscrew the drain filter counterclockwise.
  • Remove the debris from the filter.

Dismantling the washing machine: panels. Start with the top cover:

Disassembling the base plate. The drain filter can be located either behind the small door or behind the solid panel, depending on the model. Using a slotted screwdriver, squeeze the catches and remove the cover from its place.

How to remove the service hatch. Many LG models have a service hatch that is almost the size of the back wall. Therefore, it is sufficient to unscrew the fixing screws to gain access to all components.

How to remove the front cover. Start at the control panel:

  • Pull out the powder dispenser.
  • Squeeze the latch in the center and pull the tray out of the cabinet.
  • Remove the mounting screws around the perimeter.
  • Unfasten the latches and remove the controls.
  • You can disconnect the wiring, but if there is no need to inspect the module, then leave this part on top of the SM housing.
  • Bend back the sealing collar.
  • Use a screwdriver to pry up the metal clamp and remove it.
  • Tuck the rubber band inside the housing.
  • Unscrew the two screws of the watertightening device (UBL).
  • Insert your hand between the body and the cuff.
  • Take out the DIB.
  • Disconnect the contacts.

Remove the fasteners on the front wall and set it aside. Finished with the washer’s shell. Proceed to the main assemblies.

Interior Disassembly Order. Begin to remove the counterweights. They are bolted to the top and front of the tank. Now go back to the top. Disconnect the powder hopper connections and the intake valve hoses that lead to it.

Disconnect the valve contacts and remove the fasteners. Do not forget to remove the pressostat hose that leads to the tank. If there is nothing on top of it, move on to the next step.

Now you have to dismantle the heater:

Also remove plugs from the motor. The cable may be secured by clamps, which need to be loosened.

At the bottom of the tank is attached to the drainage pipe. Loosen the clamp and remove it from its place. Lastly take out the dampers by twisting their fasteners, then remove the tank from the suspension springs.

See also  How to turn on the Mask washing high

Dismantle the engine with your own hands. Perform the procedure while the tank is still hanging from the hangers.

  • Twist off the center bolt. To avoid rotation, fix the motor in one position.
  • If it does not release at first, apply some WD-40 fluid to the hinge.
  • Remove the top cover.
  • There are six more screws hidden behind it.
  • After removing them, lift the motor and remove.

Disassembly of the LG washing machine is almost complete. Remove the drum.

How to remove the drum. Once you have removed the tank from the housing, lay it down on a flat surface. Use a screwdriver to loosen the screws on the perimeter of the unit.

Remove the top part. It is not easy to pull out the drum as its joint is seized to the hub. Spray it with WD-40, let it stand for half an hour to an hour. Tap lightly on the hub with a hammer to dislodge the drum.

Visually assess the complexity of the work will help

This is how you can make repairs with your own hands. After disassembly, it remains to find the node that requires restoration or replacement parts. Good luck!

Detailed instructions

In the next step (once the machine has been pushed back), find the self-tapping screws on the back that hold the panel we need to pull off. As a rule, there are two: on the right and left, but in some devices there is also a third screw, placed in the center. Using a Phillips screwdriver, unscrew the fasteners completely. There are plastic washers under the “curly nails”. Make sure that these small parts are not lost afterwards.

Unscrew the self-tapping screws to remove the back cover

To remove the top panel, slide it backwards and lift it slightly upwards

In the next step, after completely unscrewing the fasteners, gently remove the lid. To do this, first slide it backwards (in relation to the CMA) and lift it slightly upwards. Set the panels aside. To install the cover back later, do the same thing, but in reverse: first guide the panel and the grooves, and then screw the fasteners.

This is interesting! If you are familiar with removing the side panels from an ordinary PC system unit, it will be even easier. The above steps are no different from removing the side panels of a PC.

Once you have access to the internal elements of the washing machine, perform a visual inspection or other diagnostic measures. To unscrew the door, press the special lock.

How to properly hide the hoses from the washing machine in the bathroom

The correct location of all the relevant utilities is very important, as this determines the proper operation of the technical unit. The hoses must not be kinked or pinched. In addition to serviceability is also important visual component. Protruding hoses, which also take up valuable extra space, do not blend in with any decor. In order to competently hide the communications, you need to pay attention to some nuances during the installation. Between the back of the machine and the wall of the room should be left ideally 10 cm. This is necessary so that the hoses do not cling to the existing protrusions.

Placing the hoses from the washing machine in the box of the washbasin

A great option would be to install the machine with the side of the bathtub and the back against the wall. This will allow the drain hose and the water supply hose under the bathtub. For a more aesthetic appearance, the end of the bathtub can be decorated with a special partition made of plastic or plasterboard. Behind it all the hoses will be hidden, and the free space can be used to store household chemicals.

Placing the hoses under the bathtub behind a trim panel

These are just general recommendations that will allow you to intelligently approach the process of installation and location of hoses. Each specific case can be completely individual, so it is better to consult with a specialist, and he will give specific recommendations, taking into account the size of the room and the technique.

Install a washing machine in the bathroom can almost everyone and many can do it even without the help of professionals. However, in order to use the technique was comfortable, it is better to use the advice of professionals from this article.

| Denial of responsibility | Contacts |RSS