How to make a stewed table

How to make a table from the old sewing machine Zinger

How to make a table from the old sewing machine Zinger

Singer sewing machines appeared, many know. And what happens if the machine has broken or you have a newer model? You can sell it or give it to friends. But quite often they simply forget about her, and she continues to gather dust in the corner. Many are taken to the garage, to the cottage or to the intake of scrap metal. And here is the history of legendary cars, you can finish.

But, the heritage of Isaac Merrit Zinger, has recently enjoyed great success, and as a rare thing it is of great interest among people with a creative approach: both specialists and just lovers. Because there are quite a lot of ideas for using already unnecessary legs from the machine

.

make, table

And every time you can find, something new and original. So you rush to get rid of the “rubbish”, you can always throw it away, but then it will be more difficult to find such a machine.

The sewing machine has a cast.Iron bed, the machine is directly attached to it. The openwork cast iron bed has elegant and attractive in appearance. She can perfectly fit into the interior, creating comfort and harmony of the last century in the house.

So if you have a similar machine, you are very lucky. A little time and fantasy and your house will have a new and interesting thing. And what can it be, choose you. You can make a computer or dining table, a toilet table in a bedroom or a color stand on the balcony.

make, table

Helpful advice.

Before you start creating your masterpiece, the legs from the sewing machine must be prepared. Indeed, for many years of use, it has accumulated particles of dust, dirt and machine oil for its intended purpose. Therefore, before starting work, the bed must be thoroughly washed.

Your legs can be painted in any color you like. It is better to use paint in rust, because over the long years of their life they could lose their original appearance.

Dining table from the old sewing machine Zinger

From a cast.Iron bed, you can make a wonderful dining table. Prepare the legs and paint, select the color of the paint to your liking. The countertop can be round, rectangular or square.

make, table

In the apartment or in the country, such a table will definitely collect the whole family over a cup of tea.

Computer desk

In addition to the dining table, you can make a table for a computer.

Toilet table in the bedroom

And what a wonderful vintage toilet table in the bedroom can be done from the same unnecessary legs from the sewing machine. It is better to choose more calm, light beige will look great.

And in small drawers you can store cosmetics and other small things. Table for the washbasin

Another idea of ​​using the legs from the Singer machine, a washbasin table.

Can be placed in the bathroom or in the country.

Flower stand on the balcony

How to make an elegant vintage table from a grandmother’s sewing machine

The first inventor of the prototype of the modern sewing machine was the great Leonardo da Vinci. And the first patent for the invention of the device for sewing was issued in 1755 to the British Charles Weisental. His option was quite awkward, so he did not enjoy great success. And only after almost a century, in 1845, the American inventor Elias Hou made a real revolution, having come up with a shuttle mechanism. A principle that is also used in modern machines.

Since then, the victorious procession of the sewing machine began. They took an honorable place in all sewing workshops and in the houses of needlewomen around the world, continuously improved. Over, not only the mechanism changed, but also the appearance of the machines. They became not only a working tool, but also the subject of furniture, which had to be organically entered into the most exquisite interior.

The case of the machine made either ascetic-straight, then curved with an elegant arc, with manual painting, inlaid with pearl precious stones, etc. However, from an aesthetic point of view, the lower part was of greatest interest. So far many in the houses have preserved legs from a sewing machine from cast iron of the most bizarre figure casting. Among the most popular manufacturers can be called Zinger (this brand is still heard), and several more large companies: Vilkox and Gibbs, Willer and Wilson, Zaydel and Nauman.

Since then, a lot of water has flowed, but the old Zinger masterpieces are not going to leave our lives. Stani no longer needed stanchi to support obsolete grandmother’s machines, but many of them got a chance to find a new life and turn into something else-for example, into a vintage table, a shop for an entrance hall or a malline for a summer residence.

We want to introduce you to the most, in our opinion, successful examples of how to transform the old sewing machine. This can be done by yourself, or you can contact specialists who have been transforming vintage things for many years.

See also  How to vacuum the bottom of the Bestway basin

From the bed from the sewing machine.

Do you know how many options for spectacular vintage furniture can be made from the base of the old sewing machine? We answer: a lot! But we chose the most interesting of them, because the table. It is needed in any house. On the other hand, a table from an old sewing machine. The most simple vintage furniture, which you can make with your own hands.

How toMake a Perfect Fried Egg

So, we will need a very old sewing machine with a pedal: Zinger, Pfuff, Husqvarna and even a model of the Soviet era. Unites their main thing that we need. Luxurious cast.Iron base (legs), genuine vintage. The state of the role does not play, even rusty (if it is exactly that. Buy paint for metal “right on rust” and bring the base in a neat view).

Everything else is extremely simple. Remove the wooden part or only a machine, and attach what will become a countertop on top. And they can be different. Depending on your preferences on the materials and the size of the table.

Here’s how an old sewing machine can look like. You have one? Maybe someone from friends or relatives? When you see what wonderful vintage tables you can make from it. Urgently go in search. And when you become her happy owner, do not limit yourself to the factory countertop. Make your original.

Console tables from the old sewing machine:

From the base of the sewing machine, you can make an original table table. Since this is. The easiest way, it is from such a table that we begin. As you know, a console table. A very compact table option will fit in almost any corner that will be transformed thanks to such elegant vintage furniture. And on top you can place the necessary little things or just. Delighting look.

Put the glass sheet on top. And you get a great addition to the classic living room. A countertop from an unprocessed wood or boards will help create a rustic table in the style of country. Paint the legs in white. And you will have a charming vintage console. Black table with wrought.Cut legs will make the interior in the Moroccan style completed.

However, it is not necessary to put it in the living room. Complete the unusual base with wooden sides or glass in a worn frame. Get a cute flower table appropriate both in the greenhouse and in the hallway. In addition, from the base of the sewing machine, you can also make a luxurious showcase for your collection (the easiest option. Strengthen from above Aquarium, turned upside down).

Tables from the old sewing machine

Do you know how many options for spectacular vintage furniture can be made from the base of the old sewing machine? We answer: a lot! But we chose the most interesting of them, because the table. It is needed in any house. On the other hand, a table from an old sewing machine. The most simple vintage furniture, which you can make with your own hands.

So, we will need a very old sewing machine with a pedal: Zinger, Pfuff, Husqvarna and even a model of the Soviet era. Unites their main thing that we need. Luxurious cast.Iron base (legs), genuine vintage. The state of the role does not play, even rusty (if it is exactly that. Buy paint for metal “right on rust” and bring the base in a neat view).

Everything else is extremely simple. Remove the wooden part or only a machine, and attach what will become a countertop on top. And they can be different. Depending on your preferences on the materials and the size of the table.

Here’s how an old sewing machine can look like. You have one? Maybe someone from friends or relatives? When you see what wonderful vintage tables you can make from it. Urgently go in search. And when you become her happy owner, do not limit yourself to the factory countertop. Make your original.

Console tables from the old sewing machine:

From the base of the sewing machine, you can make an original table table. Since this is. The easiest way, it is from such a table that we begin. As you know, a console table. A very compact table option will fit in almost any corner that will be transformed thanks to such elegant vintage furniture. And on top you can place the necessary little things or just. Delighting look.

Put the glass sheet on top. And you get a great addition to the classic living room. A countertop from an unprocessed wood or boards will help create a rustic table in the style of country. Paint the legs in white. And you will have a charming vintage console. Black table with wrought.Cut legs will make the interior in the Moroccan style completed.

However, it is not necessary to put it in the living room. Complete the unusual base with wooden sides or glass in a worn frame. Get a cute flower table appropriate both in the greenhouse and in the hallway. In addition, from the base of the sewing machine, you can also make a luxurious showcase for your collection (the easiest option. Strengthen from above Aquarium, turned upside down).

How to make a table from the old sewing machine Zinger

Singer sewing machines appeared, many know. And what happens if the machine has broken or you have a newer model? You can sell it or give it to friends. But quite often they simply forget about her, and she continues to gather dust in the corner. Many are taken to the garage, to the cottage or to the intake of scrap metal. And here is the history of legendary cars, you can finish.

See also  How to make a bath a furnace correctly

But, the heritage of Isaac Merrit Zinger, has recently enjoyed great success, and as a rare thing it is of great interest among people with a creative approach: both specialists and just lovers. Because there are quite a lot of ideas for using already unnecessary legs from the machine.

And every time you can find, something new and original. So you rush to get rid of the “rubbish”, you can always throw it away, but then it will be more difficult to find such a machine.

The sewing machine has a cast.Iron bed, the machine is directly attached to it. The openwork cast iron bed has elegant and attractive in appearance. She can perfectly fit into the interior, creating comfort and harmony of the last century in the house.

So if you have a similar machine, you are very lucky. A little time and fantasy and your house will have a new and interesting thing. And what can it be, choose you. You can make a computer or dining table, a toilet table in a bedroom or a color stand on the balcony.

Before you start creating your masterpiece, the legs from the sewing machine must be prepared. Indeed, for many years of use, it has accumulated particles of dust, dirt and machine oil for its intended purpose. Therefore, before starting work, the bed must be thoroughly washed.

Your legs can be painted in any color you like. It is better to use paint in rust, because over the long years of their life they could lose their original appearance.

Dining table from the old sewing machine Zinger

From a cast.Iron bed, you can make a wonderful dining table. Prepare the legs and paint, select the color of the paint to your liking. The countertop can be round, rectangular or square.

In the apartment or in the country, such a table will definitely collect the whole family over a cup of tea.

In addition to the dining table, you can make a table for a computer.

And what a wonderful vintage toilet table in the bedroom can be done from the same unnecessary legs from the sewing machine. It is better to choose more calm, light beige will look great.

And in small drawers you can store cosmetics and other small things. Table for the washbasin

Another idea of ​​using the legs from the Singer machine, a washbasin table.

If you like indoor flowers and you have a lot of them, for them you can make an interesting stand. A similar table with plants will look very beautiful. You can put both on the balcony and in the room.

The countertop can be decorated with mosaics. And if there are ability to draw, decorate with an interesting pattern. Glass counters will look no less original than from wood. Sometimes, during work, their interesting ideas may appear on how to decorate the future table. The main thing is to give your imagination to prove oneself in full force.

Stewed Pork Ribs #TastyTuesdays | CaribbeanPot.Com

Master_klass

Ancient and complex. I do not envy the sewing craftsmen of those times.

And legs (machine, according to the instructions). Visor’s eyes! Not some plastic Chinese hut. Impressive contraption: metal! Casting! With a long history and proud emblem “PMZ”). I don’t know where and at what point everything else disappeared, but you don’t have to be surprised. A lot of cities and weights traveled, and in recent years it was dusting in the dacha in the garage. A couple of years ago I already tried to adapt it, but the attempt was unsuccessful.

In general, I gathered with strength and again set about mine).At first she took up the countertop.I needed a furniture shield 40x20x1000, multi.Colored tiles, construction glue PVA (dispersion, it is stronger) and fugue.

make, table

The tile was divided into small fragments with a hammer. (Cellophanes from above. So that the good does not scatter wherever it is, especially in the eye.)

I laid the pieces around the perimeter, starting from the edges to the center (I read it somewhere on a smart site). On the edge of the village, I selected pieces that were the edges of the tiles. They are slightly rounded and due to this the edge is neat. Glue smeared a small brush for every piece.(The intermediate photo was lost somewhere).

After the last fragment entered with a rattle, she left to dry for a day.I divorced the fugue with water in a bank from under Korean carrots (this is a key moment. Otherwise nothing will come out) to the consistency of the clay mask for the face.Or toothpaste.Or ketchup. Here to whom is that closer. I didn’t think about the spatula in advance, but I wanted to work very well, right urgently. Therefore, I had to hastily cut out a self.Trouser spatula. From the cover to the same jar).

She smeared the seams in different directions, not forgetting about small cracks at the end of the countertop.

While the top layer is fresh. Removed the rest with a damp cloth.

The rest was removed with a hard brush when it was finally dried up. It’s easier, even if it is dusty. There are special brushes, but again I have an impromptu option.Maybe, from the point of view of professional tiles, all these actions deserve curses, but in my opinion, everything ended well.

See also  How to make a metal furnace for a bathhouse

Covered with alkyd varnish on top. For stability and loud.

Now the machine.The remnants of red paint I also have waited a couple of years to my stellar hour. She seemed to me very handy in the spring mood.

It remains to put everything on self.Tapping screws. First guides for boxes, then a countertop.

On this, I intended to finish this according to the initial plan, but in fact the machine seemed too red and too brilliant.

I really wanted to make neat cracks with acrylic paint and craquelure varnish, but something did not work out with it. Not a damn thing, how many did not try.

I had to shout with improvised means.

I stained with small fragments.Sprayed the paint. I took a quick.Drying acrylic.

After a couple of seconds I wet a dry cloth. And I realized that it is better to use a rag. Less fibers remain).

After another minute, you can gently rub with a metal brush for dishes. Remove the remains of sticky paper dust and create scuffs. From a metal brush, traces are more delicate than from sandpaper. Scratches are multidirectional and less distinct.

It turned out such an effect. I like it more not only in terms of a calmer color, but also because it hides the flaws of painting, and they were. This was not the first time for the first time, the influx and chips were visible in places.

In general, the final option looks like this

Eh, okay! Who am I kidding.The final option looks [like! ]

On an amateur, of course: brother calls such a work of a soviet bracie). I am less familiar with the basics of Soviet socialist construction, so my associations go roots to Gaudi, and their branches rest on the gingerbread house of the Guel Park).

Coloring

The next step in changing the machine was the application of paint. For the best effect, I used aerosol.

For staining, I took a blue paint. I wanted something bright, saturated, interesting, and if in the future I did not like it, then you can always repaint.

Further, it remained the work of the countertop. Initially, it was supposed to use the one that went with the machine. But I did not like it either in color or in shape. And with the base it was not very combined. So I decided to do everything as I see.

Cream of details

Since I decided to make a table from the old sewing machine, I needed wood material. At first I wanted to go to the store for him, but I remembered that last year I ordered several plant boxes for landing in the country, and they were brought in large wooden pallets. I did not throw them away, suddenly, I think they would come in handy.

And for sure, come in handy. Exactly a year later. We got them, dried for several days in the sun and then processed. The first stage of processing. Grinding, you can use either sandpaper or a special grinding machine. Second phase. The covers of wood with special protective means that will protect the tree from corrosion, because the table will stand exclusively on the street, under sunlight, wind and rain.

Do not forget that paints and varnishes also take time to complete drying. Learn the instructions on the packaging. Then we tossed the wooden boards a little, adjusted us to the size of the future table. After grinding, be sure to walk on all wooden surfaces with a damp cloth to collect wood dust. Do not forget to use protection products when working with wood and metal.

Sewing machine with a knife drive

Make something with your own hands, “reviving” old (and sometimes rarity) things, gives indescribable pleasure.

In today’s article we will make the manufacture of the original table, which can be used both in the workshop and at home.

As a support for the table, a metal bed from an old sewing machine with a foot drive will be used.

Of the main materials for the manufacture of the table, you will also need:

Boards; building corner; Shurup bolts.

Use a bed from a sewing machine is very convenient, because you do not need to make legs. We already have a finished support. She will only need to “refresh” it. First we disassemble the metal bed for spare parts.

Then every detail will need to be cleaned. The sandblasting apparatus will cope with this work best. If there is no sandblasting, then you have to “arm” with patience and corner grinding with cordless. Previously, you can soak the details in gasoline. The better you try, the better the final result will be.

After that, collect the bed, degrease the surface of the metal with a solvent and cover with soil through the metal. It is more convenient and faster to do it with a spray gun. At the end, the smallest will remain. Paint the bed.

At the next stage, we cut four blanks from the construction corner and weld a rectangular frame. Pill it and paint it.

Then we saw off in size the required number of boards (depending on their width), cover with mineral oil on wood and fasten it to the metal frame, having previously drilled holes in it.

| Denial of responsibility | Contacts |RSS