How to disassemble the microwave for copper

Microwave in scrap metal. Is there any copper? What is valuable?

In search of copper, non.Ferrous metals and values, I disassemble the microwave of Samsung into the scrap microwave. They say there are a lot of copper in the microwaves, let’s see what the result of disassembly in scrap metal and how much copper will be obtained, and whether there is at all in the microwave of Medyakh-Med. By the way, the microwave is a rather heavy thing and judging by the weight in it there should clearly be non.Colored metal. The microwave is disassembled quite easily, it is worth unscrewing the screws under the cross screwdriver and remove the casing from it. The filling of the microwave is not rich, there is a large transformer, its winding may well be copper, but it is worth checking it out by a file, there may be aluminum and aluminum. In addition to the transformer, copper in the microwave is also contained in various motors, two pieces with a copper winding, one motor twists a plate at the bottom of the microwave, the other is on the time of time. There is a little copper but still what no but the catch is copper. Copper is contained in wires, though the wires need to be burned. Also, you can remove the working spare parts from the microwave and try to sell them, you can take on spare parts and the supply cord, it can also be disassembled on copper, even though copper is in it and a little. Magnetron and high.Voltage capacitor can be valuable, they can be put up for sale on the Internet or will turn to buyers. There was very little copper in this microwave, I wiped the transformer with a file and found that the transformer winding is not made of copper, but aluminum, I did not get aluminum, aluminum, since the transformer of a rather complex design and the plate there are welded, so that it is quite difficult to disassemble it task. In microwaves of different companies, the transformer winding can be made of different metal, in some microwaves the winding may well be copper rather than aluminum. So you should disassemble and try. The main catch when disassembled turned out to be iron, the iron managed to get quite a lot, in any way there is something to take in scrap metal and for what to get money from garbage. But still, the main meaning of disassembling the microwave for metal is to remove the working parts from it and try to sell them. I hope the video about the disassembly of the microwave will be useful and cognitive, will bring someone practical benefits. I wish everyone a successful search, collection and surrender of scrap metal, especially non.Ferrous metals and copper. All pleasant viewing. Thank you all for viewing! Request, if you liked the video, subscribe to the channel support, your support is very important. #copper #scrap metal #flowmeter

Rent a microwave for money: where and how to send a microwave for money

The microwave oven has become an integral part of the modern world. It is present in almost every house and greatly facilitates work in the kitchen.

When malfunctions occur, users simply throw the furnace. However, you can get rid of the microwave with the benefit.

Actual tips where to put an unnecessary device are considered in this article.

How to get money for a microwave

In the modern market, there are several options for profitable disposal of the old microwave oven.

Sale

The most famous option. You can place an ad on social networks or on specialized sites. With an adequate ratio of price. The quality of the buyer will find quickly.

disassemble, microwave, copper

Shares of the exchange of old equipment for a new

Most specialized stores (Eldorado, M.) often put forward such proposals. Thus, you can successfully pass unnecessary equipment and purchase a new one on attractive conditions.

Promotions are held 2 times a year. Upon delivery, the client receives a discount for the purchase of a new product in this store.

You can find out the conditions for the provision of services and the date on official sites or in the media.

Delivery of faulty devices to specialized companies

Nowadays, many projects are aimed at buying up old equipment and processing it for recyclables.

Some are repairing and redistributing between the needing sections of the population.

Removing a microwave transformer

To participate in the program, it is necessary to leave an application on the official website. Exovation and disposal are carried out for free. The client receives material benefit.

Pawnshop. Fast option

Evaluation and execution of relevant documents take no more than 15-20 minutes.

See also  How is the microwave oven different

Suitable for those who urgently need money or do not want to bother with the nuances of sale for a long time.

The price becomes higher in the presence of all components of the kit and the absence of external defects.

Each option has its own key features and negative aspects. A large selection will allow everyone to find the most favorable for themselves.

Important. It should be remembered that broken household appliances are forbidden to be taken to public landfills. This action is persecuted by law. The violator awaits the fine and administrative responsibility.

How To Scrap A Microwave Oven For Metals / Money

Buying: for or against?

The most ideal option is to buy unnecessary microwave ovens.

There are a large number of similar organizations in the modern market, work is carried out at the state level. They are engaged in the acquisition of old or broken household appliances.

Why buy a microwave

Most often after diagnosis, suitable material is sent for processing for further use. Faulty spare parts are submitted for disposal.

disassemble, microwave, copper

Some companies, for example, the landfill project, buy old equipment for its subsequent implementation. After detecting breakdowns and repair, the microwave will go to people who are in a difficult financial situation.

How to use the service

Such enterprises are characterized by efficiency, convenience and good service.

  • To take part in the program, it is necessary to fill out an application on the official website or make a call by phone.
  • Appraisers come within a day after registration.
  • The amount of the transaction depends on the technical condition of the technique, its characteristics and the causes of the malfunction. When successful, the owner of the devices immediately receives cash.
  • Organizations not only independently go to the right addresses, but also engage in the export. There is no need to carry heavy equipment in the city.

Preparation of the device for sale

Before selling, the microwave should be brought into a favorable appearance. The impression and subsequent amount indirectly depend on this: the more the technique looks, the more buyers are ready to pay for it.

The case needs to be washed by delivering it from pollution and sebaceous spots.

A thorough check of the case should be carried out. Scratches, cracks, dents or chips significantly reduce the total cost.

The presence of additional configuration will allow the client to increase the amount of benefit. These include:

  • Factory packaging;
  • Lattice and plate, the remaining additional devices (if they were originally in the kit);
  • Purchase check and warranty card.

A few simple actions will help to profitably sell old or broken devices.

Reference. The modern market is full of a wide variety of household appliances. New models are produced quickly enough. The more functions the goods sold include, the higher the experts are ready to pay for it.

The presence of an unnecessary or failed microwave oven often burns the owner.

Old equipment can be profitably sold to interested parties or exchange and get an impressive discount for the purchase of a new product.

Take a hurry to send the microwave to the farthest corner of the apartment: you can breathe a new life into it.

How much copper is there in a micro.Wave and where it is located. How to extract copper from a microwave and how to use

Published by Kachlife in 28.Ten.2020

Currently, there is considerable demand for copper. At most points of reception of non.Ferrous scrap metal per kilogram, about 300 are ready to pay. In addition to what has been said, it can be used for other purposes. But where to get it, you ask? One option is the analysis of the old microwave.

Miffle production

For the manufacture of a muffle microwave oven, we will need a fireproof brick and a special silicon carbide crucian tiger into which metal is placed for smelting. The fireproof brick is transparent to the microwave of the wave and does not pass heat, the crucible itself heats up.

We mark the brick on 2 equal halves, using the diagonal, mark the centers of future holes. In brick, it is necessary to drill 2 holes with a diameter of 70 mm. For this, a perk or a force drill of the desired diameter is suitable. You can drill a drill or a drilling machine at low speeds T.To., The material is fragile. For good thermal insulation, the minimum wall thickness is 15-20 mm.

You can make a muffle from a shvt. Channel and fiber plates hold a temperature of 1350 degrees, processing them is much easier.

For melting metals, tigel can be used laboratory tigel.

The graphite crucible is unsuitable for the microwave, low efficiency, very slowly warming.

For a good efficiency, you need a crucible with silicon carbide. Silicon carbide or carboreund, sic, has a melting temperature of 2700 °. This material is used in industrial heats and abrasive products. Silicon carbide is very resistant to acids and not resistant to alkalis. Suitable for melting non.Ferrous metals, in the molten gland dissolves.

Measure how many ohms you have? I have 3.2 Ohms. At first it worked, and now for some reason it doesn’t work and it has become quiet when welding. Probably the primary was covered, I assume.

Why not a word about the connection scheme of the primary?

Good day.I decided to assemble this Aparatus and now, I took two trance, cut it out without analyzing the 50th wire and and that’s all, she was buzzing, measured it with a multimeter at idle, but there is no current.I read it here that it would not be idle and it will not, well, I think, I took the lamp from the car, I joined, then the electrode and put it on the terminals, it began to heat up like a nail from everyone.I turned off the joyful and began to sculp the case, I attached everything, turned on it, and the shemales are buzzing, and the “nail” is not melted, I attach the lamp and there is nothing to happen.The joke is that at the beginning, as soon as I wrapped a wire for one trance and measured it at the “idle” by a multimeter, showed 1.5 volumes?!Washed to the second, measured 0volts?!I unwashed, thought it could have wrapped something wrong, again piled the second, showed 3 volts on idle?!The joyful went home, I came to the garage in the morning, I connect the III Again 0 volts?!After, 2 hours of thought I will lay down on the Internet, then here, reconsider it again, and the III further described by the electrode operations, everything works.Here I am writing now, t.To. He will be translated again and do not work, you struck each other with a terminal and he gives a maaaalenic spark, but does not light the lamp and does not melt the lamp.These are miracles, I don’t know what to do.P.S. I saw this little wiring »Earth» Storyye glued to the body of a trance, I cut it off during disassembly.As I understand it, this wire was cut off from the secondary and he was unnecessary? Or I’m wrong

See also  Is it possible for a food film in the microwave

This small wire that cut off from the trance housing, add it back from the primary and you will be happy, be sure to serve zero or grounding to the case

As I understand it, take from any maple maple and throw it on the case?

No. Use the power supply with grounding and the grounding wire add to the trance housing so that you do not accidentally suppose the phase on the case, and on the trance, add the wires that went to the body

In general, I got away where to fasten this wire, I took the first trance just without wiring and how I unravelly drew up on idle 1.5 Volta, rummaging machine oil and dexterity of hand, not analyzing trance, introduced the third round of 50 pipelines, connected to power and voila, the washers began to weld.So the puzzle is still a mate, as one trance works without this, and the second could not reach the work parameters, although both buzzed and sometimes (described earlier) issued 3 volts.In general, the result, the goal has been achieved, but the essence of it is not making out where the dog is buried. Later in the BZ I will post the whole process.

It is necessary to change the wires of the primary winding in places on one of the transformers.

Good day.I decided to assemble this Aparatus and now, I took two trance, cut it out without analyzing the 50th wire and and that’s all, she was buzzing, measured it with a multimeter at idle, but there is no current.I read it here that it would not be idle and it will not, well, I think, I took the lamp from the car, I joined, then the electrode and put it on the terminals, it began to heat up like a nail from everyone.I turned off the joyful and began to sculp the case, I attached everything, turned on it, and the shemales are buzzing, and the “nail” is not melted, I attach the lamp and there is nothing to happen.The joke is that at the beginning, as soon as I wrapped a wire for one trance and measured it at the “idle” by a multimeter, showed 1.5 volumes?!Washed to the second, measured 0volts?!I unwashed, thought it could have wrapped something wrong, again piled the second, showed 3 volts on idle?!The joyful went home, I came to the garage in the morning, I connect the III Again 0 volts?!After, 2 hours of thought I will lay down on the Internet, then here, reconsider it again, and the III further described by the electrode operations, everything works.Here I am writing now, t.To. He will be translated again and do not work, you struck each other with a terminal and he gives a maaaalenic spark, but does not light the lamp and does not melt the lamp.These are miracles, I don’t know what to do.P.S. I saw this little wiring »Earth» Storyye glued to the body of a trance, I cut it off during disassembly.As I understand it, this wire was cut off from the secondary and he was unnecessary? Or I’m wrong

Change on the primary of one of the trance of the terminal in places

Great!)) I want to make such a thing to turn off the double bolts in the car, heating them with such a couple of questions of the floods of the thick wire, you need to take more or less and what changes at the same time?Is such a device dangerous and what to look for?

The smaller the stoves are the voltage and the larger ampezh, and to the turnover. Up to five volts, this trans does not feel a short circuit, above five will be very warming up.2-3 volts I think optimal. If you observe safety precautions, it is safe, if you work for a long time, it is better to put a coaller from a computer or from a welding semiautomatic device, it is just 220 volts

And how affects the heating of the primary?The lower the voltage will be heated, since the current is higher? I understood correctly?

I think I will do almost 3 turns, otherwise I also want to weld the wires. And the tape to the battery will weld without problems. Well, to Nicd for example for an electric screwdriver.And in the photo where it is wound this wire 1 meter taken or 2?

No, I’m in choosing 2 or 3 turns. The article also describes 3 turns in the photo, and if you make 1 less. I’m talking about it

See also  What will happen if you turn on an empty microwave

Where to take the microwave for disposal?

The disposal of household appliances is engaged in processing companies. These enterprises have their own workshops for processing stoves or serve as an intermediary between the client and the processing enterprise.

The pricing policy of companies is different. Average price tag for service-250 for processing one microwave oven. The customer only needs to deliver the goods and pay for the service. Some companies can provide the function of exporting goods from home and independently transporting it to the base.

Reception points for disposal

The company has the right to engage in companies that have received a license to work with waste of grades 1-4. You can hand over a used device under the recycling program through techniques in which they were purchased. For processing the goods, a discount for the next purchase is given. If the technique is not broken, the old oven can be sold on sites such as “Avito”, “from hand to hand” or “yula”.

A serviceable microwave can be handed over to the project “Polling”. This service provides equipment export services, but hundreds of customers are in line. You have to wait a long time. Similar service. “Chumadan”. Employees of this project resell things that are still suitable for use, and the broken are sent for processing.

Is there any copper in the microwave?

Many consumers are simply sure that with the exception of the power wire, there are no other parts containing this metal in the microwave oven. But how then the household device works? That’s right. Nothing. And, in view of the said, the indicated opinion is erroneous. In reality, a variety of wiring and engine still contain copper, and it is they that provide stable and uninterrupted operation of the household device.

Where to look for copper in a microwave oven?

First you need to take a screwdriver to analyze the device. At the first stage, remove the rear panel and door, after which all the insides of the household appliance will seem. There we will see several small transformers (coils), as well as small wiring, and a propeller consisting of stainless blades and a copper coil.

But the main part of the treasured metal is located mainly in the transformer, which in the majority forms the cost of a microwave oven.

Why do you need copper in the microwave

As mentioned above, the transformer is the main detail, without which the stove simply will not work. In addition to what has been said, small parts containing copper, namely wiring and boards that ensure the performance of the timer and the general control panel of the device are an integral part.

On a note! This metal makes it possible to set the desired heating temperature and its duration, as well as apply options (depending on the purchased model).

How to use copper from an old microwave

In fact, the extracted metal and parts obtained in the process of analyzing the microwave oven can be re.Applied, and the knowledgeable master will clearly not fly on dusty shelves.

First of all, you should find out the state of the transformer containing copper. If he is a worker, then it can be used in the repair of another furnace, or try to sell such things in the local market buyers. As well as this part can be saved in case of breakdown of the next acquired microwave. If he is non.Working, the best option is to use copper from it.

Metal that we are also looking for can also be used for different purposes. It depends on your own preferences. Consider the best options.

Secondary application

In cases where the transformer is in a non.Working state, it can be disassembled, and a decent collar of non.Ferrous metal (about 500 grams) is obtained. But where to use it? Here are a few options for secondary use of copper mined:

  • From the seized metal you can create a variety of crafts (for an amateur).
  • Use it as a rope for drying linen (the wiring is not thick enough, so you need to twist them in several layers).
  • Copper wiring will become useful in the farm. For example, they can be used in the garter of cucumbers, tomatoes and other plants.
  • Motorists will be able to use copper wire for their own purposes. Twist the rings, place nuts or washers on them, and then place in a prominent place in the garage. This storage method is quite convenient, t. To. You can sort parts by size, and if necessary, do not look for a suitable for several minutes.
disassemble, microwave, copper

Is it possible to pass copper to the scrap metal point?

Yes, such an opportunity exists. Having dismantled all the details, you will receive about 700 grams of copper. And if you clean small wiring and power cord, then the figure will increase to 800 grams. Plus, the furnace itself is made of metal, which is also accepted, and having passed the case together and you can help out about 300–350.

On a note! Together with copper, you can also pass the iron body of the microwave. This will significantly increase the amount.

| Denial of responsibility | Contacts |RSS