How to cut a hole under the hob

Installation of a countertop with a built.In hob and sink

As a rule, modern kitchen furniture is a set of hinged shelves and desktop, to which a countertop is separately bought. The countertop supplies a ready-made panel made of laminated woody stove, artificial stone or other material.

The countertop is a semi.Finished product, that is, not quite ready for installation. Before installing the countertop in place in it, you need to cut off the length, as well as cut holes for the hob and washing. We will analyze how to do this, on the example of a countertop made of wood-bruise plastic PHL.

How to correctly cut a place for a stove in a countertop

It is necessary to monitor the exact parameters of the stove itself, for this you can use the template attached instructions. You need to take a large square to depict a rectangle on the desktop.

The first thing to take care of is an electric outlet 220 volts, in which the built.In hob will be included.

To obtain a hole, you need to find a saw with an appropriate blade. Using a pedorator, the drill will first need to drill small holes along all the corners of the rectangle.

The execution process will take about 10 minutes. How to cut the countertop under the hob correctly.

The choice of location and installation should be made before the installation of furniture.

  • Determine the contour of the slab.
  • Place the installation on the table.
  • Draw the middle on a prepared flat surface, indicate the fishing line for the trimmer cut.
  • Place gaskets below for an accurate result.
  • Between the cabinet and the countertop, leave 5 cm.
  • Create initial holes.
  • Perform cuts along the lines (work by an electrician).
  • Set the surface in the resulting hole.
  • Fix with self.Tapping screws, connect.
  • Check and evaluate the result.
hole

Thus, having studied instructions and rules, everyone can cope with the task set for him.

Connection to the mains

If you are not friends with an electrician, it is better to invite a specialist who will connect everything correctly.

There are several ways to connect:

In the first case, we are, of course, not about a regular 220V outlet. Connecting a hob is strictly prohibited to it.

Instead, a special power outlet and a fork for it are used, designed for 32-40 amperes.

See also  How to put a silicone shape in an oven

Such a kit can be purchased at the electrical goods store. You need to consult a specialist to choose the right outlet. In addition, a separate fishing line for a trimmer of electrical wiring with a cross section of at least 4-6 mm2 should be laid to connect the hob.

In addition to a special outlet and fork, you can also use screw pads to connect wires or using copper sleeves designed to connect electric wires.

In general, the choice of cable cross section directly depends on the power of the built.In hobs.

It is also necessary to know that connecting a power cable through a regular circuit breaker is not allowed. You need to use a difavtomat or RCD in conjunction with AV.

To install electric hobs in apartments and private houses, the VVGNGN-LS cable is most often used, which has a low smoke and gas in the case of burning and, with proper operation, serves at least 30 years.

The wires are connected according to the standard scheme indicated in the instructions to the hob. If 4 wires come out of the stove, and your network is single.Phase (3 wires leave the wall), then two phase 1 and phase 2 terminals on the hobs must be connected using a brass jumper.

Connecting gas communications

Gas.Capacity is completely blocked. To simplify the installation process, the gas hose is immediately connected to the panel. Paronite gasket is attached using a pitch nut. It is tightly twisted on the pipe at the bottom of the panel. To make the connection reliable, the gasket is processed with solidol. You can check the availability of leaks by applying soap to them. In the absence of leaks, the foam does not appear.

hole

The combined panels are an appropriate thermal valve overlap the gas supply when heated more than 60 degrees. The feed valve must be placed in a place convenient to control.

On gas hobs are necessarily adjustable. The flame should burn without yellow glare.

We seal and compact

Before installation, it is necessary to process the cuts of the countertop with a sealant of silicone or nitrolak. So, you will protect the surface of the countertop from water, mud spots, swelling and extend its service life. You can also use the seal for installation, since it is glued itself and plays the same role.

How To Cut A Hole For An Outlet In 60 Seconds

A self.Adhesive seal is located on top, the edges of the surface should lie on it. You can also use aluminum tape for sealing, which, incidentally, protects against temperature fluctuations. If the seal is of high quality, then the hole in the countertop will serve you longer, it will not need to be repaired or replaced.

hole

Installation also differs depending on the type of panel. Are gas and electric, plus separate fastening characteristics. You can fix the mounting details with screws.

See also  Installation of the fan in the hood of the bathroom

Connecting gas communications

Gas.Capacity is completely blocked. To simplify the installation process, the gas hose is immediately connected to the panel. Paronite gasket is attached using a pitch nut. It is tightly twisted on the pipe at the bottom of the panel. To make the connection reliable, the gasket is processed with solidol. You can check the availability of leaks by applying soap to them. In the absence of leaks, the foam does not appear.

The combined panels are an appropriate thermal valve overlap the gas supply when heated more than 60 degrees. The feed valve must be placed in a place convenient to control.

On gas hobs are necessarily adjustable. The flame should burn without yellow glare.

The sizes of the hob and countertops

The acquisition and installation of countertops in the kitchen involves the use of built.In technology. The vast majority of the hobs have a standard width, and the difference in size does not exceed 5 cm.

How to Cut a Counter Top for a New Kitchen Sink. Get Ready for New Kitchen Sink

The dimensions of the future hob, should be selected according to the size of the floor cabinet, which will stand under the panel. In turn, the width of the countertop is selected on the dimensions of the hob panel so that the panel carefully fits into the countertop, and distances remain along the edges of the countertop.

For example, the AEG HK hob has dimensions (HSS): 4.3cm x57.6cmx51.6 cm, and you need a niche: 3.8 cmx56cmx49cm. This means that the width of the countertop should be at least 55, and preferably 60 cm.

It is worth noting that most modern countertops call independent ones, that is, they can be installed, if necessary, in any place of the countertop regardless of floor cabinets.

Installation of a socket and outlet for an electric stove: replacing an old socket for a stove, part 2

Measurements

Before purchasing the panel, you need to know the width of the countertop. The dimensions of most panels are standard and do not go beyond 55-57 cm. In the documentation for the panel, not only the dimensions of the panel should be indicated, but also the size of the hole in the countertop to install the panel.

To get started, the work must be purchased:

  • Countertop;
  • Gas hob;
  • Silicone sanitary sealant;
  • Maslar adhesive tape;
  • Gas connection hose;
  • Gas winding (linen or fum tape);
  • Multipak gas paste (for linen winding).
hole

Installation of an electric hob: mount and connection

To make it easier to understand how to install the hob in the hole of the countertop, present it in the form of a sequence of work. So to speak, in the form of a small but understandable instructions for installing a hob panel.

  • First we connect the gas hose to the panel. Then it will be extremely inconvenient to do it. In the pitch nut on the hose we insert a paranite gasket and capitally screw it to the threaded pipe located from the bottom of the hob. To make the connection more reliable, a paronite gasket can even be slightly lubricated with a solidol.
  • Now we take the sealing tape. As a rule, it comes complete with the hob. It has a self.Adhesive base. Gradually tearing the protective paper and glue the seal along the entire perimeter of the hole on the front side of the countertop. Glue with a whole piece. In the corners we just make turns, and do not cut the tape. When connecting the two ends, we join the tape very tightly. Without a gap.
  • Install the hob in the hole and center it so that on the front side of the countertop it looks smooth. After that, we climb under the bottom of the countertop and screw special plates in its four corners. We tighten tightly, so that there is not the slightest slit between the countertop and the hob.
See also  Epalator how much the effect is enough

How to install a built.In hob photo

Instructions for installing a hob photo photo

In principle, all. In the same way, the electric hob is mounted in the same way. The only exception is the absence of a gas hut in it. Of course, there may be other nuances. For example, if we talk about the hob depending on the oven, then here the installation process looks somewhat different. First, install an oven, and then the panel, which is already connected directly to the oven itself.

In principle, all. Now judge for yourself. This work is difficult or not. You can handle it yourself or, perhaps, contact specialists. In general, based on experience, I can say that most people who are wondering how to install a hob with their own hands are performed easily with this work. In fact, it is not complicated, and all that is needed for the successful completion of the case is clearly observing all the subtleties and nuances.

| Denial of responsibility | Contacts |RSS