How much does a tooth of a cast -iron battery weigh

How much is a cast.Iron battery

Now it has become obvious how the weight of the battery from cast iron popular among consumers of the series. But the characteristics of the original devices differ in relation to the cost and mass.

For example, one section of a three.Channel floor.Made French.Made heating device Guratec Apollo 795 weighs 13.5 kilograms. The product is demonstrated on sale with 7-sequent batteries, the total weight of which is 94.5 kilograms. When transporting it, unloading and installation, several employees will need the help of.

Foreign radiators before implementation in domestic markets should undergo a procedure for mandatory certification regarding the compliance with the GOST, but at the same time the weight of the part is not taken into account

The advantages of cast iron

If we do not consider how much a cast.Iron battery weighs, you can note a whole range of advantages of heating devices of this type, which include:

  • Corrosion resistance;
  • Resistance to chemically aggressive environments. The material is undemanding to the characteristics of the coolant;
  • Durability;
  • High heat radiation indicators. The larger the number of sections, the higher the heat transfer of the heating device.

The appearance of standard cast iron batteries is simple and concise, but today manufacturers also offer radiators made under the old days. The advantages of such models include a stylish and respectable appearance.

Various options for radiators

Specifications

Heating power power is an indicator of its heat efficiency. When calculating the heating system, the needs of the house in the heat are taken into account

It is important to know the power of the 1st section of the cast.Iron radiator to determine the size of the batteries for each heated room. Incorrect calculations lead to the fact that the room will not warm up qualitatively or vice versa. You will have to often ventilate it, removing excess heat

In an ordinary standard radiator of cast iron, a power of 1 link is 170 watts. Cast iron batteries withstand heating over 100 ° C and successfully function at a working pressure of 9 atm. This allows you to use this type of product as part of central and autonomous heating networks.

Modern models

Manufacturers offer lightweight options for gray cast iron batteries. If the weight of 1 link of the Soviet radiator MS140 is 7.12 kg, then 1 section of the Viadrus Styl 500 Czech production model weighs 3.8 kg, and its internal volume is 0.8 liters. This means that the Czech radiator of 10 links filled with the coolant will have a mass (3.8 0.8) × 10 = 46 kg. This is 40% less than the mass of the filled battery of MS 140, consisting of a similar number of elements.

Cast iron heating devices of a lightweight model are also produced in Russia. Under the EXEMET brand, Modern batteries are available, 1 section of which weighs 3.3, and its internal volume is 0.6 liters. These tubular cast.Iron radiators are characterized by relatively low heat transfer, which requires an increase in the number of links. Heating devices are designed for the floor installation.

Vintage radiators from cast iron are popular with growing popularity. These are floor models made using art casting technology. Due to volumetric complex patterns, the weight of the cast iron radiator section is significantly increased, it reaches 12 or more kilograms.

Cast iron vintage floor radiator

Life time

In houses built before the revolution, cast iron radiators are still working, installed more than 100 years ago. Modern heating devices from this material are also designed for decades of unconscious operation.

Durability is explained by the strength of cast iron, resistance to heating and pressure. Cast iron heating devices do not rust during the period when the coolant and the inner surface of the batteries are in contact with the air from the network.

much, does, cast, iron, battery

Dimensions

The weight of the section of the cast.Iron radiator depends on its height, configuration and wall thickness.

Manufacturers offer models with various characteristics:

  • The depth of the battery is from 70 to 140 mm in standard performance;
  • The width of the link varies from 35 to 93 mm;
  • Section volume. From 0.45 to 1.5 liters, depending on the dimensions;
  • Height heating device in standard design-370-588 mm;
  • Intercessor distance. 350 or 500 mm.

The answer is for the impatient

For those who do not like to read for a long time, I will immediately indicate in the table the weight of the section of the cast.Iron battery of the old.Style, as well as write how much modern analogues of aluminum and bimetall weigh:

See also  How to vertically steam tulle with an iron

Non.Standard. From 3.7 to 14.5 kg/section

I foresee your question regarding weight. Why there is no exact data on cast.Iron? After all, you need this value to determine whether you can take out your old 10-section radiator from an apartment or home with your own hands?

The question of weight is far from idle. You need to calculate your strength before agreeing to work on storage of old radiators.

The thing is that in operation there are models of different series, the same for its intended purpose, but different in weight. In addition, a lot of models are sold on the market that differ in dimensions and shape from each other. There are more than two dozen names of traditional cast.Iron today, and designer floor models cannot be counted at all.

In the photo. 15 models of radiators from cast iron, the weight of each varies significantly.

The weight of one section of the cast.Iron battery

When it comes to the acquisition and installation of heating devices from cast iron, the first association is a heavy Soviet radiator and all the difficulties of moving and editing that are connected with this. In fact, there are a lot of varieties of these devices, their mass varies in a wide range. Our goal is to convey how much the section of the cast.Iron battery of various configurations weighs and the solution to the problems associated with this.

Classic batteries

Indeed, 1 section of the classic Soviet battery MS 140, which is on sale to this day, is characterized by a considerable mass. 7. 12 kg. If we take into account the fact that the volume of one section of the cast.Iron battery MS 140 is 1.5 liters of water, then the total mass will turn out 8.62 kg. Knowing that the thermal power of each section is approximately 170 watts, then 12 such sections are required for the medium area of ​​20 m2, this will be 85 by weight.4 kg, and with water. 103.4 kg.

Note: Hereinafter, for a better understanding of the issue, an example of the enlarged calculation of thermal power and the number of sections is given.

You can say that it is not necessary to put one large device, you can divide it into two, and you will be right. Nevertheless, the pure weight of the old.Iron.Based cast.Iron batteries will then be 43 kg, that according to the rules of labor protection, it is not allowed to raise one person, an assistant will be required.

The second problem is that classic radiators are designed only for wall mounting, and the vast majority of modern houses are built of porous materials, at best, from aerated concrete or foam concrete, in the worst-from SIP panels with a filling of foam. Such walls will require a special mount for cast.Iron radiators of a complex structure with fixation at many points, which is unlikely to like.

Modern heating radiators from cast iron

For wall mounting, there are new products from gray cast iron from various manufacturers, whose mass is much less than traditional MS 140. For example, the Czech heating radiator Viadrus Styl 500, shown in the figure.

Its characteristics are as follows: mass 1 section. 3.8 kg, capacity by water. 0.8 l, the total comes out 4.6 kg. With a located heat flow of 140 watts, a 20 m2 will require 14 pcs on our room, which will be 64 by weight.4 kg with water. This indicator is 40% less than that of MS 140, and dividing it into 2 parts (32 kg each device), it becomes clear that it is possible to install cast.Iron radiators on walls of porous concrete without special additional inventures.An even lighter design is offered by a Russian manufacturer selling its heating devices under the EXEMET brand, namely Modern model.

Wendy Pretend Play Funny Police Chase Story for Kids | Costume Dress Up Video for Children

Here one section of the radiator weighs only 3.2 kg during heat transfer 93 watts, 22 sections with a total mass of 70 are required in the room of 20 m2.4 kg. This indicator is also quite good, especially if you consider that the company makes these batteries with the possibility of flooring.

It is impossible not to say a few words about a product such as a vintage cast.Iron battery, whose weight is even more than the Soviet MS 140 and in some cases reaches 14 kg. These heating devices with their appearance resemble ancient, installed in residences and estates in the distant XIX century.

The Exemet Fidelia model depicted in the figure has a weight of 12 kg with a heat transfer of 156 watts, which makes the total weight of a cast.Iron radiator for our example is simply monstrous. 154 kg. But as can be seen in the image, here the installation issue is solved differently: the first and last sections have the legs for placing the heater on the floor.

Nowadays, it is possible to choose a cast.Iron heating device in relation to different installation conditions, including by weight. Thanks to the floor installation, too heavy vintage batteries do not even need brackets for fastening, except as an additional fixation to the wall.

See also  The start button on the microwave does not work

A little about cast.Iron radiators

Cast iron radiator. Classics of the genre. It has been installed for more than 100 years, and not a single modern novelty was able to completely supplant such a battery from the market. The popularity that these radiators enjoy is determined by the characteristics of the cast iron itself.

Among the most important advantages, it is necessary to note:

  • Corrosive stability.
  • Long service life.
  • Injected to the quality of the coolant.
  • Excellent heat transfer.
  • Underlotability in operation.
much, does, cast, iron, battery

A drop of tar in this barrel of honey. Significant mass of the design. One element of a cast.Iron battery weighs 7.5 kg. It is easy to calculate that a standard radiator of 7 sections will pull for 50 kg. To ensure a normal thermal regime in the room, one heating element is not always enough. Because of this, you have to think about the reliability of attaching the elements of the system to the walls.

In addition, it should be remembered that cast iron is a fragile material. Therefore, when moving products from it and their installation, special caution should be observed so that from a random blow in the cast iron, there are no microcracks invisible to the eye. During operation, when the pressure in the heating network increases, these cracks will begin to increase, which will inevitably lead to leaks.

In conclusion

I am sure that now the question of the weight of the radiator will not be unexpected for you, and you can reasonably answer it. The video in this article will give additional information, and if there are questions. Ask, I will be happy to answer.

The cast.Iron battery is considered one of the most profitable devices for heating the house, because in addition to excellent heat transfer, it pleases with high resistance to corrosion, long service life (50 years and older) and undemanding to the quality of the heat carrier. While creating heating, you need to take into account its weight.

Classic batteries

These include the battery MS 140. It has several modifications, but one section weighs 7.12 kg. It is designed for 1.5 liters of water. Therefore, the total mass of one battery sector is 8.62 kg. It is this figure that must be taken into account when calculating the mass, which should withstand the mount. If you take into account only the weight of the battery itself, then the mount, having received additional pressure from the mass of water, may not withstand. Such a battery should be installed on the mount recorded in the wall. The wall should withstand an additional load of almost 104 kg. If the wall was built of brick or concrete, then such a cast.Iron radiator can be calmly hanged on the wall.

The classic installation method involves fixing horizontal brackets on the wall with hooks at the end. The latter hung a battery. Walls of porous materials or SIP panels will not survive high pressure, and the radiator will fall on the floor.

There is a way out in such a situation:

  • You need to use a special mount, which should be fixed at many points.
  • It is necessary to install cast.Iron batteries of modern modifications. They are easier and more effective in terms of heat exchange.
  • Choose models with the ability to install on the floor.

Modern options for cast iron radiators

They consist of lighter sectors. One of the Czech manufacturers offers a radiator, one section of which weighs 3.8 kg. In this case, 0.8 liters of water can fit in it. As a result, the total mass of the sector is 4.6 kg.

For heating the aforementioned room, you need to take a radiator with 14 sections. He will weigh 64.4 kg. This figure includes a mass of cast iron and water.

Such a radiator will still be heavy for walls made of porous material, however, if it is divided into two parts and place them on different walls, then you can forget about the need for additional mounts.

Domestic manufacturers offer radiators with a lighter sector. Its characteristics are as follows:

However, they have the worst heat transfer. As a result, for heating a room of 20 m², 22 sections must be taken. The mass of the radiator will be 85.8 kg. This weight for modern foam blocks is not quite suitable. The situation can be saved by radiators with legs. The legs have only the first and last sections.

Determination of the weight of the heating device

Stereotypical cast.Iron radiators consist of several ribs, for example, from seven or twelve. There are heating devices and more impressive sizes. To determine how much the heating battery weighs without water, it is necessary to multiply the weight of the cast iron radiator section by the amount of ribs. For example, a battery of seven sections weighs about 50.5 kg. One element of a cast.Iron heating radiator contains 1.5 liters of water. But there are more leaning models that contain only one liter of water. In very old models of cast iron batteries, the liter of liquid is almost 1.7 liters in one section.

When heating devices are turned on, their weight increases. To correctly determine the required number of sections in the heating system, you need to know the rest of the parameters:

See also  How coffee makers and satellite are different

The current vintage cast iron radiators are widely recognized by users. The large weight of cast.Iron radiators does not affect the operation of the heating system. To reduce or increase the power of the devices, it is necessary to remove or add additional sections. For a longer time of operation of cast.Iron radiators and retaining high thermal conductivity in them, they are recommended to wash every season every season.

HIDRAULIC PRESS VS THE HARDEST STONES VS TUNGSTEN

How radiators are produced?

Since the appearance of the first cast.Iron heating device, in the production technology there has changed a little. All modern radiators are made by casting casting method. Since the shape of the battery has changed over time, its adjustments were also made to the production process: the radiator began to be made by the heartfelt. After casting, finished products are collected at the factory. Each section is fastened with the subsequent, using threaded nipples. Therefore, if a leak occurs in the radiator, then it occurs most often either at the place of attachment of the device to the heating system, or at the threaded junction of individual sections.

The number of sections of radiators can be different, depending on the manufacturer. Caulogs manufactured by the Czech Republic are produced by ten sections, radiators of the Lugansk Foundry and Mechanical Plant of the MS140 Four and Semey. Cast iron batteries in the USSR were very popular. Thin steel radiators, although it were much easier, but often could not cope with the heating room, leaked and flooded neighbors. If a cast.Iron radiator was installed in the room, then such a room was the warmest place in the house. Therefore, having taken up the repair, Soviet citizens tried to change heating devices to cast iron, taking out a scarce product. In many apartments, despite the large selection of modern heating devices, cast-iron batteries, as before, the owners have very “warm” relations with them.

Unlike metal “counterparts”, cast iron radiators were distinguished by another obvious advantage: it was convenient to paint them. Each owner of the living space in an apartment building, at least once, faced the problem of painting batteries. The plate and tubular radiators required annual update, and coloring them was very uncomfortable and long. With cast.Iron radiators, the painting process was much faster, since they did not have “tricky” forms and small details. From the plant, heating devices were supplied with grouped, so you could choose the color of the paint and paint the surface of the battery to your own taste.

It was not easy to install a cast.Iron battery to one person. It was not the difficulty of connecting, in order to raise and hold a cast.Iron radiator, at least the effort of two people was required.

Modern heating radiators from cast iron

For wall mounting, there are new products from gray cast iron from various manufacturers, whose mass is much less than traditional MS 140. For example, the Czech heating radiator Viadrus Styl 500, shown in the figure.

Its characteristics are as follows: mass 1 section. 3.8 kg, capacity by water. 0.8 l, the total comes out 4.6 kg. With a located heat flow of 140 watts, a 20 m2 will require 14 pcs on our room, which will be 64 by weight.4 kg with water. This indicator is 40% less than that of MS 140, and dividing it into 2 parts (32 kg each device), it becomes clear that it is possible to install cast.Iron radiators on walls of porous concrete without special additional inventures. An even lighter design is offered by a Russian manufacturer selling its heating devices under the EXEMET brand, namely Modern model.

Here one section of the radiator weighs only 3.2 kg during heat transfer 93 watts, 22 sections with a total mass of 70 are required in the room of 20 m2.4 kg. This indicator is also quite good, especially if you consider that the company makes these batteries with the possibility of flooring.

It is impossible not to say a few words about a product such as a vintage cast.Iron battery, whose weight is even more than the Soviet MS 140 and in some cases reaches 14 kg. These heating devices with their appearance resemble ancient, installed in residences and estates in the distant XIX century.

The Exemet Fidelia model depicted in the figure has a weight of 12 kg with a heat transfer of 156 watts, which makes the total weight of a cast.Iron radiator for our example is simply monstrous. 154 kg. But as can be seen in the image, here the installation issue is solved differently: the first and last sections have the legs for placing the heater on the floor.

| Denial of responsibility | Contacts |RSS