Glass replacement on a gas hob

Glass replacement with a hob

Specialists of the Smart Master service center repair hobs of any brands, regardless of the complexity of the breakdown. Glass replacement on the hob occurs with maximum caution according to the manufacturer’s technical regulations.

Basic period. 6 months, expanded. Up to 3 years!

Our masters carried out more than 93% of repairs this year.

We make an official estimate in which we prescribe each step in detail.

You will not have to pay for the craftsman’s departure. This service is completely free.

Why is the glass of the hob

Manufacturers say: the glass.Ceramic panel is able to withstand a load of up to 25 kg per cm 2. But this does not mean that when treating it, you should not be careful. The rules for using such devices are set out in the instructions. Their non.Compliance leads to breakdown. So that the hob of glass ceramics does not crack, you can’t:

  • To drop heavy objects to the surface. Pots, pans (sometimes there is enough knife for the chip, which fell vertically with the tip down);
  • Include several captures for all power at the same time;
  • Maintain heating for a long time;
  • Pour cold water on a hot stove (this does not apply to small spray);
  • Silet sugar on it, which will quickly melt. After cleaning the surface, small damage will appear in the material, they easily cause cracks;
  • Put a pan on an unpeeled surface, if it sticks, then it will come off with part of the glass panel;
  • Leave unattended boiling sugar syrup, and even more so. Jam, if they float over the edge, it is impossible to remove them without a microtrauma of the panel;
  • Cook food in aluminum dishes, with flat or concave, but not a convex bottom;
  • Use abrasive materials for care, they scratch the surface, microcracks form. The cause of serious damage;
  • Use gesture washcloths for cleaning. You need scrapers and sponges for glass ceramics.

But even if all this is not done, the cracks are inevitable when the hob of glass ceramics is originally installed incorrectly: laid back to the edges. During expansion from heating, a voltage is created in the material, the result of which is a crack.

If the glass of the hob is burst, the cause of the damage can be determined by the nature of the damage:

  • When the crack hit is branched, with jumpers;
  • When overheating, they appear in the working area, go to the edges;
  • The center is cracking from improper installation.

Damage to the panel are different: a small chip in the corner or a crack crossing the entire surface with rays-refinements. But regardless of their size, it is dangerous to cook on it:

  • The operation of the plate is violated;
  • Heat goes through the cracks;
  • The size of the cracks increases;
  • There is a danger of an electric shock, especially if you touch the wet pan with your hands.
See also  The sewing machine does not sew the reason

Regardless of the amount of damage, it is impossible to use the stove.

If the hob is broken, what to do in this case? Options for further actions only 2: replacing the panel of the new, repairing damage. The choice is determined by the value of the crack and the skills of the owner. There is a third option. Sparing: replacing the panel, and sometimes slabs in the center of the service at the expense of the manufacturer, if the warranty is still valid. This is possible when the reason is a factory marriage. If the glass-ceramic hob is cracked due to improper operation of the stove, you will have to pay for its replacement.


Even small scratches can grow into a huge problem: the glass.Ceramic surface will be covered with cracks. You can remove the smallest damage in two ways:

  • A soft cloth is covered with pasty mixture of soda and water, the surface is polished with movements in a circle, everything that remains is removed with a dry towel;
  • A composition designed for polishing the surfaces made of metal is covered with a cotton swab and wiped the top of the stove, the remains are removed with paper towels.

Before using the product, you need to experience its effect on a small area. If everything is in order, proceed to the removal of microdistributions.

And what can be done if the hob has cracked by touching the working area? The best option is to call for the help of a specialist. If there are skills in working with glass and glue, you can eliminate damage on your own. The main requirement for the materials used is high temperature resistance. You will need:

  • Glue. Silicate, cosmofen (if the place of damage does not heat above 50 degrees) or cyanacrylate;
  • Silicone;
  • Pieces of glass in size 4-5×9 cm;
  • Epoxy resin;
  • Aluminum plate in size of cracks;
  • Rubber spatula;
  • Alcohol, gasoline or acetone for degreasing.
  • Disconnect the stove from power supply.
  • The panel is removed.
  • Repair begins with thorough degreasing.
  • Lubricate the crack with glue.
  • Enhance surfaces around the perimeter (but not under the burners) pieces of glass, planting them on silicone.
  • If the elements of glass ceramics are not enough, empty places are filled with epoxy resin.
  • The scene is amplified by the prepared aluminum plate, gluing it under a crack.

When the resin seizes and the glue freezes, the panel is put in place.

Replacing the hob

People who have encountered such a necessity often have a number of questions. We have prepared answers to them.

Where to contact to replace the hob

You found that the glass burst or cracks appeared on the surface on the surface? And do not know what to do? To change the panel, you should contact specialists!

There are special service centers for repairing household appliances.

These can be representative offices of those companies that have made your plate. Large brands, such as HotPoint, Bosh, Maunfeld, necessarily have branches in all large cities.

You can also contact the universal centers for the repair of household appliances. They work with a wide range of breakdowns of products of different companies.

Important! Before you contact some service, make sure that it has a direct access to the manufacturer of your electric stove.

glass, replacement

Because in order to replace the hob, you need to use the proprietary glass.Ceramic panel. They are not sold in the public domain, therefore, they can only be purchased from the manufacturer.

See also  Blades for cleaning glass -ceramic stove

How glass replacement is carried out

Installing a new hob instead of the one that cracked, occurs according to the following algorithm.


You can usually leave a request at the service center remotely. For example, by phone, the operator. He will definitely say when to wait for the master.


Before starting work, damage is always carried out. Even if everything seems obvious to you, some hidden pitfalls may be revealed. It is better to trust a specialist in this matter.

Coordination of upcoming work

After the diagnosis, the master tells the client that it needs to be replaced. And also clarifies which procedures to do, how much it will cost.

Gas stove Low flame problem repairing very Easy & Simple at home

The next stage will begin only after you learn all the details and agree with the plan of the upcoming repair.


If it really is only about the replacement of the glass that has cracked, then the process will take several hours. From the side it looks pretty simple. However, it requires the use of special equipment, branded spare parts and good skills.

Reception of work

The final part of the whole process is a check how the surface works.

Important! Keep in mind that service centers usually give a guarantee for their work for a period of 1-2 years, depending on a particular company.

The figure consists of several main components: the price of the necessary spare parts, the cost of work. There may also be an additional allowance for the urgency of the repair. But the diagnostics of service centers are usually carried out for free.

Firstly, secondly, the complexity of the performance is evaluated. Direct

Thus, the cost of replacing the hob is approximately 50-60% of the price of the new stove.

Glass replacement at the hob

Found 275 service centers to replace glass at the hob.

Geepas glass top gas stove burst | Glass Stove Blast |how to protect glass stove top. Saimiskitchen

How to order masters for the hobs at home

It is quite easy to make a calling the master. Just choose a convenient way for you.

The most acceptable form is a phone call. You describe the nature of the breakdown, as well as the address of the installation site of the hob panel. To select original spare parts, the operator may ask to clarify the technical data of the hob panel. Upon receipt of complete information, we will orient you at the cost. If the information of the incomplete company operator proposes to place an order for the initial diagnosis.

If you are inconvenient to communicate on the phone, use the online service in the right corner of the site. In a pop.Up window, set out in detail the reason for the appeal and wait for the master’s answer.

We leave for the repair of surfaces to any area of ​​Moscow and the Moscow region:

Korolev, Khimki, Pushkino, Mytishchi, Balashikha, Shchelkovo, Krasnogorsk, Vidnoye, Reutov, Dzerzhinsky and others.

VAO, SEAO, Yuzao, North.West I, CAO, CAO, SOA, CJSC, VAO.

We carry with us all components and spare parts.

8/495 / 506-81-52. We are waiting for your calls every day from 9.00 to 21.00


Found 95 service centers, 830 renovation masters with a home travel panels: select a suitable company, or leave a request and the master will contact you.

  • AEG
  • Bauknecht
  • Beko
  • Bosch
  • Brandt
  • Candy
  • CATA
  • Darina
  • De Dietrich
  • Delonghi
  • Electrolux
  • Fagor
  • Fornelli
  • Fratelli Onofri
  • Gaggenau
  • Gefest
  • Gorenje
  • Hansa
  • Hotpoint-Ariston
  • IKEA
  • Kaiser
  • Korting
  • Kuppersberg
  • Kuppersbusch
  • Lex
  • Leran
  • Maunfeld
  • Midea
  • Miele
  • Nardi
  • Neff
  • Samsung
  • Schott
  • Siemens
  • Smeg
  • Teka
  • Weissgauff
  • Whirlpool
  • Zanussi
  • Repair of the hobs, departure of the master
  • 24 hours
  • Payment by card
  • Urgent repair
  • Departure of the master
  • Calling the courier
  • Free diagnostics
  • Repair of any hob at home
  • Payment by card
  • Urgent repair
  • Departure of the master
  • Calling the courier
  • Free diagnostics
  • Repair of hobs of any brands
  • 24 hours
  • Payment by card
  • Urgent repair
  • Departure of the master
  • Calling the courier
  • Free diagnostics
  • Repair of any hob at home
  • Payment by card
  • Urgent repair
  • Departure of the master
  • Calling the courier
  • Free diagnostics
See also  How to brew capsule coffee without a coffee machine

M. Skobelevskaya street. Moscow region Leninsky district worker village Drozhzhino Street New Highway D5 K1

Black panel glass broke. We will replace!

Our company also replaces the hobs of the hobs of any brands and models (Bosch, Electrolux, AEG, Ardo, Ariston, Beko, Bompani, Candy, De Dietrich, Fagor, Gaggenau, Gorenje, Hansa, Hitachi, HotPoint-AL. Indesit, Kaiser, Korting, Krona, Kuchenchef, Kuppersberg, Kuppersbusch, Lex, Midea, Miele, Nardi, Neff, Ore, Panasonic, Samsung, Schaub Lorenz, Siemens, Smeg, Teka, Weissgauff, Whirlpool, Zanussi, Zigmund Shtain и т.D.) while maintaining sizes and all markings. The cost of the service is calculated individually depending on the complexity of the work, the manufacturer of consumables, your location.

The master of our company goes home to any area of ​​Moscow and the region. Time is discussed with you in advance.

Useful articles

The washing machine does not rinse in modern washing machines a large selection of washing modes, some devices can even wash shoes. The “rinse” mode is present in almost all models, even in the simplest. But often, car owners are faced with the fact that rinsing does not work, as a result, linen gets everything in foam and washing powder. What to do, if.

How to get a bone from a washing machine during washing, outsiders can fall into the machine. A trifle, buttons, bones from bras. This is indicated by the characteristic features. Clangs, creaking, unpleasant noises, which were not there before. Usually these items remain in the drum, they just just get them. We will tell you how to do this, why not leave.

How to remove foam from the washing machine washing things in the washing machine is accompanied by a number of actions. You need to load dirty things into the tank, choose the right laundry mode and click on the Start button. The main plus of washing in the typewriter is not required to control the process, you can do your own business, and after the end of the process, just hang clean things already. But sometimes the process.

If you are energetic, responsible, independent!

You have experience in the repair of household or industrial equipment, then join the strongest league of professionals! Call or send a resume.

Mechanical damage. From 3 000 ₽

Type of repair / services Price
Replacing glass.Ceramic surface 3 000 ₽
Replacement of glass.Ceramic gas surface 3 000 ₽
Replacement of glass.Ceramic induction surface 3 300 ₽

29 61 29 61 round.The.Clock support

You can also place an order for the call of the master at home online. To do this, just fill out a short form.

| Denial of responsibility | Contacts |RSS