Ariston does not twist the drum of the washing machine

Ariston washing machine does not twist the drum. What to do. Tips, causes of breakdown

That if suddenly the drum of your washing machine stopped showing signs of life, suddenly froze and that’s it? Although other functions of the machine work perfectly: a set of water, heating, draining, etc. Everything works except the drum, which froze in one position.

What is the reason that the drum at the Ariston washing machine stopped spinning? What to do, where to look for a malfunction? Let’s try to figure it out.

We got acquainted with the causes of the breakdown when the washing machine broke down and the drum stopped spinning. Such situations when the drum suddenly stopped spinning. If the owner of the washing machine has time and a great desire to delve into himself, then it remains to him, only wish for success and finally not to spoil the machine with his intervention. Today it is better to involve a professional master to work, who knows the device of the machine “along and across”, and knows perfectly how to repair it, more profitable, cheaper and faster. Such a specialist will professionally eliminate the breakdown, will also give a guarantee to his work, and your precious time will save!

Ariston does not twist the drum of the washing machine

The following reasons that occur in the case when the washing machine does not rotate are indicated from the most probable to the least probable. Check or test each reason, starting with the most likely reasons.

Reason 1 Bloc of the Cover switch

The cover of the cover switch prevents the rotation of the tank of the washing machine when the cover is open. If the cover of the cover of the cover does not work, then the lamp of the washing machine does not rotate. To determine whether the lid switch is defective, use the multimeter to check the operation of the lid switch. If the lid switch does not work, replace it.

Reason 2 engine couplings

The engine coupling connects the engine to the transmission of the washing machine. If the washing machine is overloaded, then the engine clutch does not work to protect the engine and transmission. The coupling can also fail due to normal wear. Check the motor coupling to determine if it is broken. If the engine is broken, replace it.

Reason 3 drive belt

Inspect the drive belt to determine whether it is broken or does not hang on the pulleys. If the drive belt is broken or chopped, replace it.

Reason 4 door latch

The door closes the door of the washing machine during operation. When the door of the washing machine is closed, the washing machine can start working. If the door of the washing machine is not closed, then the door switch will prevent the operation of the washing machine. If the door latch is faulty, then the washing machine does not rotate and does not start. The door latch can fail either mechanically or electrically. Inspect the door latch for damage. If the door latch is damaged or does not close properly, replace it. To determine if the door latch slammed shut, use the multimeter to check all the switches on the door latch to ensure continuity. If one of the switches has no continuity when turning on, replace the switch.

Reason 5 A block of locking door and motor

The door closes the door of the washing machine during operation. As soon as the cover of the washing machine is closed, the washing machine can start working. If the door of the washing machine is not closed, then the door switch will prevent the operation of the washing machine. If the door latch is faulty, then the lamp of the washing machine does not rotate and does not start. The door latch can fail either mechanically or electrically. Inspect the door latch for damage. If the door latch is damaged or not closed properly, then replace it. To determine whether the door latch is electrically closed, consult with the electrical circuit of the washing machine and use the multimeter to check all the switches on the door latch to ensure continuity. If one of the switches does not work, then replace it.

Reason 6 Motor Management Unit

Motor controls provides motor power supply. If the engine control board is faulty, then the washing machine may work incorrectly or not to work at all. First, check the control board for burnt components. To determine if the engine control board is damaged, make sure that it supplies the power to the motor. If the food enters the control board, but is not supplied to the engine, then replace it.

The clutch unit provides a connection between the gearbox and the internal drum. It helps the drum gradually gain the selected speed speed. If the clutch is worn, then this may prevent the drum rotation. Clutch is not repaired. If it is worn, it requires replacement. Reason 8 drive pulley

The drive pulley is connected to the drum and works with the drive belt and the engine rotating the drum. If the drive pulley is worn, then the drive belt can slip, thereby without rotating the washing drum. Remove the drive pulley and inspect it. If the drive pulley is faulty, then replace it.

Reason 9 Clutch belt set

The coupling connects the transmission and the internal tank, helping Baku gradually gain the correct speed of rotation. If the coupling is worn out, then this may prevent the rotation of the tank. If the clutch belt is worn out, then replace it.

See also  Overlock does not capture the left needle thread

The stator interacts with the rotor to create a strong electromagnetic field rotating the tank in the right direction. If the winding on the status is damaged, then the washing drum will not rotate or wash. Check the stator for damaged windings or other defects.

The rotor interacts with the stator to create a strong electromagnetic field rotating the tank in one direction or another. If the magnets on the rotor are damaged or any part of the rotor is damaged, then the drum cannot rotate or mix. To determine whether the rotor is defective, inspect the rotor for damage. If the rotor is damaged, then replace it.

Reason 12 hub bearing

The bearing of the washing drum is installed in the middle of the external tank of the washing machine. Back bearing helps maintain the smoothness of the internal drum. If the tank bearing is faulty, then it can jam and not rotate the washing drum. The washing machine can also make a loud roar. Replacing the bearing of the tank is a very difficult repair and will require the dismantling of most of the washing machine. If the tank bearing is faulty, then we recommend replacing both the outer tank and the bearing assembly.

Reason 13 set of seals and bearings

The bearing and sealing for the drum are installed in the middle of the external tank of the washing machine. The drum bearing helps maintain the smooth rotation of the inner drum. If the tank bearing is faulty, then it may stall and not rotate the tank. The washing machine can also make a loud roar. Replacing the bearing for the tank is a very difficult repair and will require the dismantling of most of the washing machine. If the tank bearing is faulty, then we recommend replacing both the outer tank and the bearing.

Reason 14 rear drum with a bearing

The rear drum has a bearing or bearings in it, so that the inner washing tank rotates smoothly. If the rolling bearings system are damaged, then washing can become very noisy, and the drum may stop rotating. On some washing machines, bearings are sold separately from the rear drum, but we recommend replacing both the external drum and the bearing in the assembly, if the manufacturer offers the components together, because the removal and impress of the new bearing can be a very difficult process. Keep in mind that the replacement of the external drum and bearing is also not easy to perform and can be very expensive.

We work only by certified specialists HotPoint-Ariston

All our engineers underwent three.Month training at the HotPoint specialized center, as well as every year undergo a mandatory advanced training.

Methods for preventing problems in the future

Thoroughly devastate your s before washing. All a trifle (baby socks, nasal scarves) and bras load in special mesh bags.

It is important not to overflow the tank-follow the recommendations of the manufacturer for the maximum weight of the linen, do not fill the machine to the limit

Connect a washing machine through an uninterrupted power source or at least an extension cord with a locker lock, if you live outside the city or just have problems with the jumps in the mains.

This is especially true for models with many programs and too smart “brain”. Pay attention to the correct grounding of the machine.

In addition, it is necessary to regularly carry out the preventive cleaning of the drum. This will protect the washer from breakdowns and the occurrence of unpleasant odors.

Replacing bearings and omentum with your own hands in the Ariston Hotpoint washing machine with a plastic non.Vegetable tank:

About the author:

ariston, does, twist, drum

Electron engineer with many years of experience. For several years he was engaged in organizing household appliances, including washing machines. Loves sports fishing, water tourism and travel.

Found a mistake? Select it and press the buttons:

History is known when the kitten fell into the drum of the washing machine and, having passed the full washing cycle on the Woolen things program, got out of the unit whole and unharmed. The only nuisance for the pet was an allergy to washing powder.

For washing small things on the road or hotel, it is convenient to use a regular plastic bag. Socks or tights are kneaded inside the tied package with water and a small amount of detergent. This method allows you to pre.Soak things and perform washing without damaging the fabric and without spending a lot of powder and water.

In the XIX century, a lot of time was leaving for the washing of ladies’ toilets. The dresses were pre.Opened, and then washed and dried each part separately so that the fabric would not deform. After washing, the clothes were sewn again.

Washing machines equipped with functions “without ironing” or “light ironing” can wash underwear and at the same time practically do not crush it. Such an effect is achieved due to a special approach to squeezing. It is performed at low speeds, with large pauses, and a small amount of water is preserved in the tank.

ariston, does, twist, drum

The first officially patented washing machine was made of wood and was a box with a frame filled to half with wooden balls. Inside, the laundry for washing, the detergent and with the help of the lever moved the frame, which, in turn, forced the balls and wipe the linen.

The expression “soap opera” (“soap”) did not accidentally arise. The very first series and show, whose audience made up women, were broadcast on television at a time when housewives performed cleaning, ironing and washing. In addition, to attract spectators to screens on the air, advertising rollers of detergents were often scrollful: soap and powders.

Cosmonauts, being in the orbit of the Earth, solve the problem of dirty things with the original method. Clothes are dropped from a spaceship, and it burns in the upper layers of the atmosphere.

See also  The sewing machine does not sew the reason

There is a washing machine “For bachelors”. Linen washed in such an unit does not need to be ironed at all! The thing is that the device does not have a drum: some of the things can be placed inside the container directly on the hangers (for example, jackets and shirts), and smaller things (for example, linen and socks). On special shelves.

ariston, does, twist, drum

There are a variety of balls that are used in the washing machine. Antistatic will not give the fabric to stick to the body after washing, balls with special loops will “comb” the villi and prevent the appearance of the rollers, and silicone with pimples will not allow fluff when washing outerwear washed.

How to clean the steam generator from scale

Instructions for installing a ceiling drying-liana

DIY underwear dryer

What is the difference between a steam generator from a steamer: what is better to choose

How to choose a drying machine for home underwear: tips, parameters

Do.It.Yourself renovator repair

How to choose a floor dryer for linen: tips, best models, video

How to clean the scapard of scale at home

How to use a converter for clothes, instructions

DIY underwear dryer

How to choose a clothing subtitle

Candy washing machine codes

Stirkaved.Ru © 2022. When using materials from the site, the active reference is obligatory.

The drum flew

Symptoms: when scrolling manually, the drum makes creaking sounds.

If a rattle and script are heard when scrolling the drum, this most likely means bearings of the bearings. Sweet the drum back and forward: if you feel backlash, then the drum has shifted from its place and a gap formed between it and the hatch. You can, of course, still conduct an extending check at maximum speed, but there is a risk of completely choosing a car.

The reasons can be in a drive belt (flew, worn out), bearings, shaft deformation, breakdown of springs or shock absorbers holding the tank. And if you can still cope with the belt yourself, then it is better to entrust the rest of the rest to a professional.

Questions. Answers

Victor Good afternoon. The machine electrolyux, when washing, disappeared, when the light appeared in the washer stopped the drum and jammed the door, the car works for water and drain. What to do in such cases?

Master’s answer: Victor, turn off the fork from the outlet, drain the water through the drain filter, and after turning on the hatch is unlocked.

Anonymous car Indesit, please tell me what the reason is collecting water, there is a drain, but the drum does not twist.

Master’s answer: check the squeezing program, if it does not work, then the case is in the motor, if it works, then the matter is a malfunction of the heater (water heater).

Alexander Good afternoon, tell me from his feet lost, recently a problem did not twist the drum to ideish, checked the brushes of the engine wiring (all the whole) thought the PPC, called the repairman, he cleaned the fee for 2-5 minutes and said the cockroaches and took a decent amount for such a small work, 4-5 days have passed again such a breakdown, tell me what to clean or change in such a situation on the board? Bo again call it expensive.

Master’s answer: Alexander, in our opinion, the master did not do his job, it is necessary to check and diagnose. If there are a lot of cockroaches, then they can do a lot of problems inside the machine.

Sergey Hello, Washing Machine Siemens. Such a problem happened. When washing, the drum gives one circle and stops for several minutes, then everything is repeated. T.E. The drum is spinning but no more than a circle, so to speak tries to accelerate and stops. Manually the drum rotates normally without noise, this belt? Thank you

Master’s answer: Sergey, if the drum does not spin at the laundry mode, then check by turning it on your machine separately the spin mode. If the squeezer works out, then the case is in the heater, if the outlet does not work out, then check the drive belt and wear of the electric motor brushes.

Sergey Hello I have a Beko Wmb 50811F car. When the button is turned on, the start starts to type water to almost half the tank and immediately drain, the buttons do not react at all, the motor does not twist. What could be the problem?

Master’s answer: Sergey, the reason may not be in the engine, but in the water heater. After the gulf of water, it should heat up and, t.To. Ten is faulty, the machine drains water to avoid a short circuit.

Andrei. Good afternoon. Bosch machine. When washing, the drum rotates for some time, then stops, the silk of the inclusion of the program is heard. During work, the drum makes sounds like foil creaks, very quietly, unobtrusively.

Master’s answer: Andrei, most likely, you have worn.Out bearings and seals of the drum washing.

Alexey Hello! The machine began to buzz for the drying. Erases normally, merges, squeezes, rinses but as it comes to drying, a wild rumble begins. The air heats up, the drum is spinning. Drain filter in order. Tell me, please, what can it be? I tried to twist the legs and moved it. Thanks.

Master’s answer: Alexei, the reason may be in the wear of the bearing and breakdown of the laundry of the washing machine.

Venus Hello! Please tell me the washing machine (Candy CS085 TXT), the washing time is on and the drain works, but the drum does not spin. What could be the problem? Thanks.

How to clean Hotpoint Aquarius Washing Machine Pump Filter and Dispensing Drawer

Master’s answer: Venus, the problem may be the wear of the electric motor brushes.

There was no romance before. Sometimes it does not squeeze on average loading. She does not even start twisting by spin

Master’s answer: Roman, you can change the brushes for better contact with the rotor. But a small amount of linen may be a problem for a machine.

See also  How much does a tooth of a cast -iron battery weigh

Roman and what to do? What to change or repair?

Master’s answer: Roman, fill out at least 1.5 kg of linen.

Indesite novel WG1031 TP R. With full load (sheet blankets), everything works correctly, erases, rinses, squeezes 100%. With low loading (children’s things)-it is erasing and the drum rotates, on rinse and spin, it can stand all the time without rotating the drum, with the intermittent sound of uu-uu-uu, with 2-3 restarts of the program can squeeze. The belt was changed, the brushes have about 1 cm in reserve on the extension.

Master’s answer: Roman, if there is little linen, then the machine may not balance linen.

Marina Hello, I sat down a lot of linen, I began to twist the machine with great difficulty, a couple of times the sound was as if something was eating, and then the drum stopped spinning, the sound is, and not spinning. What could it be?

Master’s answer: Marina, the reason may be to jam the bearing on the shaft. Check with your hand by the drum with your hand, when the power is disconnected.

Alexey Drum stopped spinning. He twitches, t.E. As if trying to start movement, and that’s all. A couple of days there was an incomprehensible sound when spinning, barely noticeable. What could it be? Thanks.

Master’s answer: Alexey, the reason may be a malfunction of the bearing and shaft seals.

Vitaly looked very bad! And how to diagnose the module and valve, you can tell?

Master’s answer: Vitaly, valve measure the resistance with a multimeter, and check the module with a multimeter all capacitors.

Vitaly Hello, again! I turned today about cotton in a typewriter. Changed Ten. Did not help! Does not gain water, the door is blocked! The modes switch (light bulbs light up) but no movements, does not even click. There is no water in the machine itself. Brushes on the engine of norms. Help me please!

Washing machine Ariston Indesit error F08

Master’s answer: Good afternoon! You have changed the heating without his diagnosis? Or, all the same, he was burned out? Diagnize the module and water supply valve.

Lyudmila Indzit, old woman, this year 20 years. Never failed. The first problem has just begun. Began to squeeze loudly and make sounds. I try to twist an empty drum with my hand. It goes with a stretch. Here in thought: it is worth repairing or not? Maybe the problem is small, now you can’t buy such a machine, and the repair of the wow (do one thing, and it can already be on the way). What can you advise. So used to her as a family member.

Why is the washing machine not gaining momentum. Main reasons

Malfunction of the water level sensor (Pressostate)

The working sensor informs the manager of the module, what is the water level in the typewriter, then the “brain” of the washer includes drain or squeeze. If the sensor seems that the water is still in the typewriter, then the outskirts will not begin: the machine will try to drain non.Existent water. At the same time, the turnover will be much lower than with an annex. Sensor replacement is necessary.

Tagger malfunction (speed control sensor)

Tagktor controls the revolution of the washing machine. If it breaks, then the machine loses control over speed and does not give a command to accelerate the drum. Sensor replacement is necessary.

Electronic module or programmer malfunction

Because of this, the washing machine cannot normally give commands to other nodes. In our case, the speed mode does not turn on. You need “flashing” or replacement of the board.

Washing machine engine malfunction

Most often the reason is in the inter.Seal circuit: the engine works, but only in “half asleep”. He has enough power to rotate the drum during washing and draining, but it is not possible to disperse the drum for spinning. Engine repair or replacement is required.

When ordering any repair services through the site

By pressing the “Call the Master” button, you agree to the processing of personnel data and confirm your adulthood in accordance with the conditions


Replacing the bearing of any wipe, one of the most time.Consuming tasks that requires a complete disassembly of the unit. I offer you a brief replacement instruction, in case you decide to do it yourself.

  • Remove two self.Tapping screws from behind, they fix the top, then shift it to yourself.
  • You need to remove the section for the powder and dismantle the screw under it. Also, several bolts hid in the lid. After that, raise the panel up and put it on the washer so that it does not interfere.
  • Open the hatch and feel the cuff in the edges of the cuffs, pull the pliers for it to get the clamp.
  • Gently remove the cuff itself.
  • All the bolts in front are also unscrewed, after that the main part of the case can also be removed.
  • There is an engineering hatch of whole metal from behind, there is nothing to describe here, we remove the fasteners and remove it.
  • All nozzles and hoses, terminals and wires, disconnect.
  • We take out the tank and put it on the floor, opening down.
  • Here is the desired component, in the very center of the back, knock it out with a chisel and a hammer.
  • Before planting a new part, clean, degrease and grease the surface.

Here are the instructions for replacement in a nutshell, it remains only to assemble the assembly in the reverse order and check the performance of the device.

| Denial of responsibility | Contacts |RSS